/* ![[previous]](../icons/n_left.png)
![[next]](../icons/n_right.png)
![[first]](../icons/first.png)
![[last]](../icons/last.png)
![[top]](../icons/n_top.png)
![[bottom]](../icons/bottom.png)
![[index]](../icons/index.png)
![[help]](../icons/help.png)
*/
DEFINITIONS
This source file includes following definitions.
- max_uint
- raise_zlib_error
- finalizer_warn
- rb_zlib_version
- checksum_long
- do_checksum
- rb_zlib_adler32
- rb_zlib_adler32_combine
- rb_zlib_crc32
- rb_zlib_crc32_combine
- rb_zlib_crc_table
- zlib_mem_alloc
- zlib_mem_free
- zstream_init
- zstream_expand_buffer
- zstream_expand_buffer_into
- zstream_expand_buffer_protect
- zstream_expand_buffer_without_gvl
- zstream_append_buffer
- zstream_detach_buffer
- zstream_shift_buffer
- zstream_buffer_ungets
- zstream_buffer_ungetbyte
- zstream_append_input
- zstream_discard_input
- zstream_reset_input
- zstream_passthrough_input
- zstream_detach_input
- zstream_reset
- zstream_end
- zstream_run_func
- zstream_unblock_func
- zstream_run
- zstream_sync
- zstream_mark
- zstream_finalize
- zstream_free
- zstream_memsize
- zstream_new
- get_zstream
- rb_zstream_end
- rb_zstream_reset
- rb_zstream_finish
- rb_zstream_flush_next_in
- rb_zstream_flush_next_out
- rb_zstream_avail_out
- rb_zstream_set_avail_out
- rb_zstream_avail_in
- rb_zstream_total_in
- rb_zstream_total_out
- rb_zstream_data_type
- rb_zstream_adler
- rb_zstream_finished_p
- rb_zstream_closed_p
- rb_deflate_s_allocate
- rb_deflate_initialize
- rb_deflate_init_copy
- deflate_run
- rb_deflate_s_deflate
- do_deflate
- rb_deflate_deflate
- rb_deflate_addstr
- rb_deflate_flush
- rb_deflate_params
- rb_deflate_set_dictionary
- rb_inflate_s_allocate
- rb_inflate_initialize
- inflate_run
- rb_inflate_s_inflate
- do_inflate
- rb_inflate_add_dictionary
- rb_inflate_inflate
- rb_inflate_addstr
- rb_inflate_sync
- rb_inflate_sync_point_p
- rb_inflate_set_dictionary
- gzfile_mark
- gzfile_free
- gzfile_memsize
- gzfile_new
- gzfile_reset
- gzfile_close
- gzfile_write_raw
- gzfile_read_raw_partial
- gzfile_read_raw_rescue
- gzfile_read_raw
- gzfile_read_raw_ensure
- gzfile_read_raw_until_zero
- gzfile_get16
- gzfile_get32
- gzfile_set32
- gzfile_raise
- gzfile_error_inspect
- gzfile_make_header
- gzfile_make_footer
- gzfile_read_header
- gzfile_check_footer
- gzfile_write
- gzfile_read_more
- gzfile_calc_crc
- gzfile_newstr
- gzfile_fill
- gzfile_read
- gzfile_readpartial
- gzfile_read_all
- gzfile_getc
- gzfile_ungets
- gzfile_ungetbyte
- gzfile_writer_end_run
- gzfile_writer_end
- gzfile_reader_end_run
- gzfile_reader_end
- gzfile_reader_rewind
- gzfile_reader_get_unused
- get_gzfile
- new_wrap
- gzfile_ensure_close
- gzfile_wrap
- rb_gzfile_s_wrap
- gzfile_s_open
- rb_gzfile_to_io
- rb_gzfile_crc
- rb_gzfile_mtime
- rb_gzfile_level
- rb_gzfile_os_code
- rb_gzfile_orig_name
- rb_gzfile_comment
- rb_gzfile_lineno
- rb_gzfile_set_lineno
- rb_gzfile_set_mtime
- rb_gzfile_set_orig_name
- rb_gzfile_set_comment
- rb_gzfile_close
- rb_gzfile_finish
- rb_gzfile_closed_p
- rb_gzfile_eof_p
- rb_gzfile_sync
- rb_gzfile_set_sync
- rb_gzfile_total_in
- rb_gzfile_total_out
- rb_gzfile_path
- rb_gzfile_ecopts
- rb_gzwriter_s_allocate
- rb_gzwriter_s_open
- rb_gzwriter_initialize
- rb_gzwriter_flush
- rb_gzwriter_write
- rb_gzwriter_putc
- rb_gzreader_s_allocate
- rb_gzreader_s_open
- rb_gzreader_initialize
- rb_gzreader_rewind
- rb_gzreader_unused
- rb_gzreader_read
- rb_gzreader_readpartial
- rb_gzreader_getc
- rb_gzreader_readchar
- rb_gzreader_getbyte
- rb_gzreader_readbyte
- rb_gzreader_each_char
- rb_gzreader_each_byte
- rb_gzreader_bytes
- rb_gzreader_ungetc
- rb_gzreader_ungetbyte
- gzreader_skip_linebreaks
- rscheck
- gzreader_charboundary
- gzreader_gets
- rb_gzreader_gets
- rb_gzreader_readline
- rb_gzreader_each
- rb_gzreader_lines
- rb_gzreader_readlines
- rb_gzreader_external_encoding
- Init_zlib
/*
* zlib.c - An interface for zlib.
*
* Copyright (C) UENO Katsuhiro 2000-2003
*
* $Id: zlib.c 55105 2016-05-21 17:47:52Z naruse $
*/
#include <ruby.h>
#include <zlib.h>
#include <time.h>
#include <ruby/io.h>
#include <ruby/thread.h>
#ifdef HAVE_VALGRIND_MEMCHECK_H
# include <valgrind/memcheck.h>
# ifndef VALGRIND_MAKE_MEM_DEFINED
# define VALGRIND_MAKE_MEM_DEFINED(p, n) VALGRIND_MAKE_READABLE((p), (n))
# endif
# ifndef VALGRIND_MAKE_MEM_UNDEFINED
# define VALGRIND_MAKE_MEM_UNDEFINED(p, n) VALGRIND_MAKE_WRITABLE((p), (n))
# endif
#else
# define VALGRIND_MAKE_MEM_DEFINED(p, n) 0
# define VALGRIND_MAKE_MEM_UNDEFINED(p, n) 0
#endif
#define RUBY_ZLIB_VERSION "0.6.0"
#ifndef GZIP_SUPPORT
#define GZIP_SUPPORT 1
#endif
/* from zutil.h */
#ifndef DEF_MEM_LEVEL
#if MAX_MEM_LEVEL >= 8
#define DEF_MEM_LEVEL 8
#else
#define DEF_MEM_LEVEL MAX_MEM_LEVEL
#endif
#endif
#if SIZEOF_LONG > SIZEOF_INT
static inline uInt
max_uint(long n)
{
if (n > UINT_MAX) n = UINT_MAX;
return (uInt)n;
}
#define MAX_UINT(n) max_uint(n)
#else
#define MAX_UINT(n) (uInt)(n)
#endif
static ID id_dictionaries;
/*--------- Prototypes --------*/
static NORETURN(void raise_zlib_error(int, const char*));
static VALUE rb_zlib_version(VALUE);
static VALUE do_checksum(int, VALUE*, uLong (*)(uLong, const Bytef*, uInt));
static VALUE rb_zlib_adler32(int, VALUE*, VALUE);
static VALUE rb_zlib_crc32(int, VALUE*, VALUE);
static VALUE rb_zlib_crc_table(VALUE);
static voidpf zlib_mem_alloc(voidpf, uInt, uInt);
static void zlib_mem_free(voidpf, voidpf);
static void finalizer_warn(const char*);
struct zstream;
struct zstream_funcs;
struct zstream_run_args;
static void zstream_init(struct zstream*, const struct zstream_funcs*);
static void zstream_expand_buffer(struct zstream*);
static void zstream_expand_buffer_into(struct zstream*, unsigned long);
static void zstream_append_buffer(struct zstream*, const Bytef*, long);
static VALUE zstream_detach_buffer(struct zstream*);
static VALUE zstream_shift_buffer(struct zstream*, long);
static void zstream_buffer_ungets(struct zstream*, const Bytef*, unsigned long);
static void zstream_buffer_ungetbyte(struct zstream*, int);
static void zstream_append_input(struct zstream*, const Bytef*, long);
static void zstream_discard_input(struct zstream*, long);
static void zstream_reset_input(struct zstream*);
static void zstream_passthrough_input(struct zstream*);
static VALUE zstream_detach_input(struct zstream*);
static void zstream_reset(struct zstream*);
static VALUE zstream_end(struct zstream*);
static void zstream_run(struct zstream*, Bytef*, long, int);
static VALUE zstream_sync(struct zstream*, Bytef*, long);
static void zstream_mark(void*);
static void zstream_free(void*);
static VALUE zstream_new(VALUE, const struct zstream_funcs*);
static struct zstream *get_zstream(VALUE);
static void zstream_finalize(struct zstream*);
static VALUE rb_zstream_end(VALUE);
static VALUE rb_zstream_reset(VALUE);
static VALUE rb_zstream_finish(VALUE);
static VALUE rb_zstream_flush_next_in(VALUE);
static VALUE rb_zstream_flush_next_out(VALUE);
static VALUE rb_zstream_avail_out(VALUE);
static VALUE rb_zstream_set_avail_out(VALUE, VALUE);
static VALUE rb_zstream_avail_in(VALUE);
static VALUE rb_zstream_total_in(VALUE);
static VALUE rb_zstream_total_out(VALUE);
static VALUE rb_zstream_data_type(VALUE);
static VALUE rb_zstream_adler(VALUE);
static VALUE rb_zstream_finished_p(VALUE);
static VALUE rb_zstream_closed_p(VALUE);
static VALUE rb_deflate_s_allocate(VALUE);
static VALUE rb_deflate_initialize(int, VALUE*, VALUE);
static VALUE rb_deflate_init_copy(VALUE, VALUE);
static VALUE deflate_run(VALUE);
static VALUE rb_deflate_s_deflate(int, VALUE*, VALUE);
static void do_deflate(struct zstream*, VALUE, int);
static VALUE rb_deflate_deflate(int, VALUE*, VALUE);
static VALUE rb_deflate_addstr(VALUE, VALUE);
static VALUE rb_deflate_flush(int, VALUE*, VALUE);
static VALUE rb_deflate_params(VALUE, VALUE, VALUE);
static VALUE rb_deflate_set_dictionary(VALUE, VALUE);
static VALUE inflate_run(VALUE);
static VALUE rb_inflate_s_allocate(VALUE);
static VALUE rb_inflate_initialize(int, VALUE*, VALUE);
static VALUE rb_inflate_s_inflate(VALUE, VALUE);
static void do_inflate(struct zstream*, VALUE);
static VALUE rb_inflate_inflate(VALUE, VALUE);
static VALUE rb_inflate_addstr(VALUE, VALUE);
static VALUE rb_inflate_sync(VALUE, VALUE);
static VALUE rb_inflate_sync_point_p(VALUE);
static VALUE rb_inflate_set_dictionary(VALUE, VALUE);
#if GZIP_SUPPORT
struct gzfile;
static void gzfile_mark(void*);
static void gzfile_free(void*);
static VALUE gzfile_new(VALUE, const struct zstream_funcs*, void (*) _((struct gzfile*)));
static void gzfile_reset(struct gzfile*);
static void gzfile_close(struct gzfile*, int);
static void gzfile_write_raw(struct gzfile*);
static VALUE gzfile_read_raw_partial(VALUE);
static VALUE gzfile_read_raw_rescue(VALUE);
static VALUE gzfile_read_raw(struct gzfile*);
static int gzfile_read_raw_ensure(struct gzfile*, long);
static char *gzfile_read_raw_until_zero(struct gzfile*, long);
static unsigned int gzfile_get16(const unsigned char*);
static unsigned long gzfile_get32(const unsigned char*);
static void gzfile_set32(unsigned long n, unsigned char*);
static void gzfile_make_header(struct gzfile*);
static void gzfile_make_footer(struct gzfile*);
static void gzfile_read_header(struct gzfile*);
static void gzfile_check_footer(struct gzfile*);
static void gzfile_write(struct gzfile*, Bytef*, long);
static long gzfile_read_more(struct gzfile*);
static void gzfile_calc_crc(struct gzfile*, VALUE);
static VALUE gzfile_read(struct gzfile*, long);
static VALUE gzfile_read_all(struct gzfile*);
static void gzfile_ungets(struct gzfile*, const Bytef*, long);
static void gzfile_ungetbyte(struct gzfile*, int);
static VALUE gzfile_writer_end_run(VALUE);
static void gzfile_writer_end(struct gzfile*);
static VALUE gzfile_reader_end_run(VALUE);
static void gzfile_reader_end(struct gzfile*);
static void gzfile_reader_rewind(struct gzfile*);
static VALUE gzfile_reader_get_unused(struct gzfile*);
static struct gzfile *get_gzfile(VALUE);
static VALUE gzfile_ensure_close(VALUE);
static VALUE rb_gzfile_s_wrap(int, VALUE*, VALUE);
static VALUE gzfile_s_open(int, VALUE*, VALUE, const char*);
NORETURN(static void gzfile_raise(struct gzfile *, VALUE, const char *));
static VALUE gzfile_error_inspect(VALUE);
static VALUE rb_gzfile_to_io(VALUE);
static VALUE rb_gzfile_crc(VALUE);
static VALUE rb_gzfile_mtime(VALUE);
static VALUE rb_gzfile_level(VALUE);
static VALUE rb_gzfile_os_code(VALUE);
static VALUE rb_gzfile_orig_name(VALUE);
static VALUE rb_gzfile_comment(VALUE);
static VALUE rb_gzfile_lineno(VALUE);
static VALUE rb_gzfile_set_lineno(VALUE, VALUE);
static VALUE rb_gzfile_set_mtime(VALUE, VALUE);
static VALUE rb_gzfile_set_orig_name(VALUE, VALUE);
static VALUE rb_gzfile_set_comment(VALUE, VALUE);
static VALUE rb_gzfile_close(VALUE);
static VALUE rb_gzfile_finish(VALUE);
static VALUE rb_gzfile_closed_p(VALUE);
static VALUE rb_gzfile_eof_p(VALUE);
static VALUE rb_gzfile_sync(VALUE);
static VALUE rb_gzfile_set_sync(VALUE, VALUE);
static VALUE rb_gzfile_total_in(VALUE);
static VALUE rb_gzfile_total_out(VALUE);
static VALUE rb_gzfile_path(VALUE);
static VALUE rb_gzwriter_s_allocate(VALUE);
static VALUE rb_gzwriter_s_open(int, VALUE*, VALUE);
static VALUE rb_gzwriter_initialize(int, VALUE*, VALUE);
static VALUE rb_gzwriter_flush(int, VALUE*, VALUE);
static VALUE rb_gzwriter_write(VALUE, VALUE);
static VALUE rb_gzwriter_putc(VALUE, VALUE);
static VALUE rb_gzreader_s_allocate(VALUE);
static VALUE rb_gzreader_s_open(int, VALUE*, VALUE);
static VALUE rb_gzreader_initialize(int, VALUE*, VALUE);
static VALUE rb_gzreader_rewind(VALUE);
static VALUE rb_gzreader_unused(VALUE);
static VALUE rb_gzreader_read(int, VALUE*, VALUE);
static VALUE rb_gzreader_getc(VALUE);
static VALUE rb_gzreader_readchar(VALUE);
static VALUE rb_gzreader_each_byte(VALUE);
static VALUE rb_gzreader_ungetc(VALUE, VALUE);
static VALUE rb_gzreader_ungetbyte(VALUE, VALUE);
static void gzreader_skip_linebreaks(struct gzfile*);
static VALUE gzreader_gets(int, VALUE*, VALUE);
static VALUE rb_gzreader_gets(int, VALUE*, VALUE);
static VALUE rb_gzreader_readline(int, VALUE*, VALUE);
static VALUE rb_gzreader_each(int, VALUE*, VALUE);
static VALUE rb_gzreader_readlines(int, VALUE*, VALUE);
#endif /* GZIP_SUPPORT */
/*
* Document-module: Zlib
*
* This module provides access to the {zlib library}[http://zlib.net]. Zlib is
* designed to be a portable, free, general-purpose, legally unencumbered --
* that is, not covered by any patents -- lossless data-compression library
* for use on virtually any computer hardware and operating system.
*
* The zlib compression library provides in-memory compression and
* decompression functions, including integrity checks of the uncompressed
* data.
*
* The zlib compressed data format is described in RFC 1950, which is a
* wrapper around a deflate stream which is described in RFC 1951.
*
* The library also supports reading and writing files in gzip (.gz) format
* with an interface similar to that of IO. The gzip format is described in
* RFC 1952 which is also a wrapper around a deflate stream.
*
* The zlib format was designed to be compact and fast for use in memory and on
* communications channels. The gzip format was designed for single-file
* compression on file systems, has a larger header than zlib to maintain
* directory information, and uses a different, slower check method than zlib.
*
* See your system's zlib.h for further information about zlib
*
* == Sample usage
*
* Using the wrapper to compress strings with default parameters is quite
* simple:
*
* require "zlib"
*
* data_to_compress = File.read("don_quixote.txt")
*
* puts "Input size: #{data_to_compress.size}"
* #=> Input size: 2347740
*
* data_compressed = Zlib::Deflate.deflate(data_to_compress)
*
* puts "Compressed size: #{data_compressed.size}"
* #=> Compressed size: 887238
*
* uncompressed_data = Zlib::Inflate.inflate(data_compressed)
*
* puts "Uncompressed data is: #{uncompressed_data}"
* #=> Uncompressed data is: The Project Gutenberg EBook of Don Quixote...
*
* == Class tree
*
* - Zlib::Deflate
* - Zlib::Inflate
* - Zlib::ZStream
* - Zlib::Error
* - Zlib::StreamEnd
* - Zlib::NeedDict
* - Zlib::DataError
* - Zlib::StreamError
* - Zlib::MemError
* - Zlib::BufError
* - Zlib::VersionError
*
* (if you have GZIP_SUPPORT)
* - Zlib::GzipReader
* - Zlib::GzipWriter
* - Zlib::GzipFile
* - Zlib::GzipFile::Error
* - Zlib::GzipFile::LengthError
* - Zlib::GzipFile::CRCError
* - Zlib::GzipFile::NoFooter
*
*/
void Init_zlib(void);
/*--------- Exceptions --------*/
static VALUE cZError, cStreamEnd, cNeedDict;
static VALUE cStreamError, cDataError, cMemError, cBufError, cVersionError;
static void
raise_zlib_error(int err, const char *msg)
{
VALUE exc;
if (!msg) {
msg = zError(err);
}
switch(err) {
case Z_STREAM_END:
exc = rb_exc_new2(cStreamEnd, msg);
break;
case Z_NEED_DICT:
exc = rb_exc_new2(cNeedDict, msg);
break;
case Z_STREAM_ERROR:
exc = rb_exc_new2(cStreamError, msg);
break;
case Z_DATA_ERROR:
exc = rb_exc_new2(cDataError, msg);
break;
case Z_BUF_ERROR:
exc = rb_exc_new2(cBufError, msg);
break;
case Z_VERSION_ERROR:
exc = rb_exc_new2(cVersionError, msg);
break;
case Z_MEM_ERROR:
exc = rb_exc_new2(cMemError, msg);
break;
case Z_ERRNO:
rb_sys_fail(msg);
/* no return */
default:
exc = rb_exc_new_str(cZError,
rb_sprintf("unknown zlib error %d: %s", err, msg));
}
rb_exc_raise(exc);
}
/*--- Warning (in finalizer) ---*/
static void
finalizer_warn(const char *msg)
{
fprintf(stderr, "zlib(finalizer): %s\n", msg);
}
/*-------- module Zlib --------*/
/*
* Document-method: Zlib.zlib_version
*
* Returns the string which represents the version of zlib library.
*/
static VALUE
rb_zlib_version(VALUE klass)
{
VALUE str;
str = rb_str_new2(zlibVersion());
OBJ_TAINT(str); /* for safe */
return str;
}
#if SIZEOF_LONG > SIZEOF_INT
static uLong
checksum_long(uLong (*func)(uLong, const Bytef*, uInt), uLong sum, const Bytef *ptr, long len)
{
if (len > UINT_MAX) {
do {
sum = func(sum, ptr, UINT_MAX);
ptr += UINT_MAX;
len -= UINT_MAX;
} while (len >= UINT_MAX);
}
if (len > 0) sum = func(sum, ptr, (uInt)len);
return sum;
}
#else
#define checksum_long(func, sum, ptr, len) (func)((sum), (ptr), (len))
#endif
static VALUE
do_checksum(int argc, VALUE *argv, uLong (*func)(uLong, const Bytef*, uInt))
{
VALUE str, vsum;
unsigned long sum;
rb_scan_args(argc, argv, "02", &str, &vsum);
if (!NIL_P(vsum)) {
sum = NUM2ULONG(vsum);
}
else if (NIL_P(str)) {
sum = 0;
}
else {
sum = func(0, Z_NULL, 0);
}
if (NIL_P(str)) {
sum = func(sum, Z_NULL, 0);
}
else {
StringValue(str);
sum = checksum_long(func, sum, (Bytef*)RSTRING_PTR(str), RSTRING_LEN(str));
}
return rb_uint2inum(sum);
}
/*
* Document-method: Zlib.adler32
*
* call-seq: Zlib.adler32(string, adler)
*
* Calculates Adler-32 checksum for +string+, and returns updated value of
* +adler+. If +string+ is omitted, it returns the Adler-32 initial value. If
* +adler+ is omitted, it assumes that the initial value is given to +adler+.
*
* Example usage:
*
* require "zlib"
*
* data = "foo"
* puts "Adler32 checksum: #{Zlib.adler32(data).to_s(16)}"
* #=> Adler32 checksum: 2820145
*
*/
static VALUE
rb_zlib_adler32(int argc, VALUE *argv, VALUE klass)
{
return do_checksum(argc, argv, adler32);
}
#ifdef HAVE_ADLER32_COMBINE
/*
* Document-method: Zlib.adler32_combine
*
* call-seq: Zlib.adler32_combine(adler1, adler2, len2)
*
* Combine two Adler-32 check values in to one. +alder1+ is the first Adler-32
* value, +adler2+ is the second Adler-32 value. +len2+ is the length of the
* string used to generate +adler2+.
*
*/
static VALUE
rb_zlib_adler32_combine(VALUE klass, VALUE adler1, VALUE adler2, VALUE len2)
{
return ULONG2NUM(
adler32_combine(NUM2ULONG(adler1), NUM2ULONG(adler2), NUM2LONG(len2)));
}
#else
#define rb_zlib_adler32_combine rb_f_notimplement
#endif
/*
* Document-method: Zlib.crc32
*
* call-seq: Zlib.crc32(string, crc)
*
* Calculates CRC checksum for +string+, and returns updated value of +crc+. If
* +string+ is omitted, it returns the CRC initial value. If +crc+ is omitted, it
* assumes that the initial value is given to +crc+.
*
* FIXME: expression.
*/
static VALUE
rb_zlib_crc32(int argc, VALUE *argv, VALUE klass)
{
return do_checksum(argc, argv, crc32);
}
#ifdef HAVE_CRC32_COMBINE
/*
* Document-method: Zlib.crc32_combine
*
* call-seq: Zlib.crc32_combine(crc1, crc2, len2)
*
* Combine two CRC-32 check values in to one. +crc1+ is the first CRC-32
* value, +crc2+ is the second CRC-32 value. +len2+ is the length of the
* string used to generate +crc2+.
*
*/
static VALUE
rb_zlib_crc32_combine(VALUE klass, VALUE crc1, VALUE crc2, VALUE len2)
{
return ULONG2NUM(
crc32_combine(NUM2ULONG(crc1), NUM2ULONG(crc2), NUM2LONG(len2)));
}
#else
#define rb_zlib_crc32_combine rb_f_notimplement
#endif
/*
* Document-method: Zlib.crc_table
*
* Returns the table for calculating CRC checksum as an array.
*/
static VALUE
rb_zlib_crc_table(VALUE obj)
{
#if !defined(HAVE_TYPE_Z_CRC_T)
/* z_crc_t is defined since zlib-1.2.7. */
typedef unsigned long z_crc_t;
#endif
const z_crc_t *crctbl;
VALUE dst;
int i;
crctbl = get_crc_table();
dst = rb_ary_new2(256);
for (i = 0; i < 256; i++) {
rb_ary_push(dst, rb_uint2inum(crctbl[i]));
}
return dst;
}
/*-------- zstream - internal APIs --------*/
struct zstream {
unsigned long flags;
VALUE buf;
long buf_filled;
VALUE input;
z_stream stream;
const struct zstream_funcs {
int (*reset)(z_streamp);
int (*end)(z_streamp);
int (*run)(z_streamp, int);
} *func;
};
#define ZSTREAM_FLAG_READY 0x1
#define ZSTREAM_FLAG_IN_STREAM 0x2
#define ZSTREAM_FLAG_FINISHED 0x4
#define ZSTREAM_FLAG_CLOSING 0x8
#define ZSTREAM_FLAG_GZFILE 0x10 /* disallows yield from expand_buffer for
gzip*/
#define ZSTREAM_FLAG_UNUSED 0x20
#define ZSTREAM_READY(z) ((z)->flags |= ZSTREAM_FLAG_READY)
#define ZSTREAM_IS_READY(z) ((z)->flags & ZSTREAM_FLAG_READY)
#define ZSTREAM_IS_FINISHED(z) ((z)->flags & ZSTREAM_FLAG_FINISHED)
#define ZSTREAM_IS_CLOSING(z) ((z)->flags & ZSTREAM_FLAG_CLOSING)
#define ZSTREAM_IS_GZFILE(z) ((z)->flags & ZSTREAM_FLAG_GZFILE)
#define ZSTREAM_EXPAND_BUFFER_OK 0
/* I think that more better value should be found,
but I gave up finding it. B) */
#define ZSTREAM_INITIAL_BUFSIZE 1024
/* Allow a quick return when the thread is interrupted */
#define ZSTREAM_AVAIL_OUT_STEP_MAX 16384
#define ZSTREAM_AVAIL_OUT_STEP_MIN 2048
static const struct zstream_funcs deflate_funcs = {
deflateReset, deflateEnd, deflate,
};
static const struct zstream_funcs inflate_funcs = {
inflateReset, inflateEnd, inflate,
};
struct zstream_run_args {
struct zstream * z;
int flush; /* stream flush value for inflate() or deflate() */
int interrupt; /* stop processing the stream and return to ruby */
int jump_state; /* for buffer expansion block break or exception */
int stream_output; /* for streaming zlib processing */
};
static voidpf
zlib_mem_alloc(voidpf opaque, uInt items, uInt size)
{
voidpf p = xmalloc2(items, size);
/* zlib FAQ: Valgrind (or some similar memory access checker) says that
deflate is performing a conditional jump that depends on an
uninitialized value. Isn't that a bug?
http://www.zlib.net/zlib_faq.html#faq36 */
(void)VALGRIND_MAKE_MEM_DEFINED(p, items * size);
return p;
}
static void
zlib_mem_free(voidpf opaque, voidpf address)
{
xfree(address);
}
static void
zstream_init(struct zstream *z, const struct zstream_funcs *func)
{
z->flags = 0;
z->buf = Qnil;
z->buf_filled = 0;
z->input = Qnil;
z->stream.zalloc = zlib_mem_alloc;
z->stream.zfree = zlib_mem_free;
z->stream.opaque = Z_NULL;
z->stream.msg = Z_NULL;
z->stream.next_in = Z_NULL;
z->stream.avail_in = 0;
z->stream.next_out = Z_NULL;
z->stream.avail_out = 0;
z->func = func;
}
#define zstream_init_deflate(z) zstream_init((z), &deflate_funcs)
#define zstream_init_inflate(z) zstream_init((z), &inflate_funcs)
static void
zstream_expand_buffer(struct zstream *z)
{
if (NIL_P(z->buf)) {
zstream_expand_buffer_into(z, ZSTREAM_INITIAL_BUFSIZE);
return;
}
if (!ZSTREAM_IS_GZFILE(z) && rb_block_given_p()) {
if (z->buf_filled >= ZSTREAM_AVAIL_OUT_STEP_MAX) {
int state = 0;
VALUE self = (VALUE)z->stream.opaque;
rb_str_resize(z->buf, z->buf_filled);
rb_obj_reveal(z->buf, rb_cString);
OBJ_INFECT(z->buf, self);
rb_protect(rb_yield, z->buf, &state);
z->buf = Qnil;
zstream_expand_buffer_into(z, ZSTREAM_AVAIL_OUT_STEP_MAX);
if (state)
rb_jump_tag(state);
return;
}
else {
zstream_expand_buffer_into(z,
ZSTREAM_AVAIL_OUT_STEP_MAX - z->buf_filled);
}
}
else {
if (RSTRING_LEN(z->buf) - z->buf_filled >= ZSTREAM_AVAIL_OUT_STEP_MAX) {
z->stream.avail_out = ZSTREAM_AVAIL_OUT_STEP_MAX;
}
else {
long inc = z->buf_filled / 2;
if (inc < ZSTREAM_AVAIL_OUT_STEP_MIN) {
inc = ZSTREAM_AVAIL_OUT_STEP_MIN;
}
rb_str_resize(z->buf, z->buf_filled + inc);
z->stream.avail_out = (inc < ZSTREAM_AVAIL_OUT_STEP_MAX) ?
(int)inc : ZSTREAM_AVAIL_OUT_STEP_MAX;
}
z->stream.next_out = (Bytef*)RSTRING_PTR(z->buf) + z->buf_filled;
}
}
static void
zstream_expand_buffer_into(struct zstream *z, unsigned long size)
{
if (NIL_P(z->buf)) {
/* I uses rb_str_new here not rb_str_buf_new because
rb_str_buf_new makes a zero-length string. */
z->buf = rb_str_new(0, size);
z->buf_filled = 0;
z->stream.next_out = (Bytef*)RSTRING_PTR(z->buf);
z->stream.avail_out = MAX_UINT(size);
rb_obj_hide(z->buf);
}
else if (z->stream.avail_out != size) {
rb_str_resize(z->buf, z->buf_filled + size);
z->stream.next_out = (Bytef*)RSTRING_PTR(z->buf) + z->buf_filled;
z->stream.avail_out = MAX_UINT(size);
}
}
static void *
zstream_expand_buffer_protect(void *ptr)
{
struct zstream *z = (struct zstream *)ptr;
int state = 0;
rb_protect((VALUE (*)(VALUE))zstream_expand_buffer, (VALUE)z, &state);
return (void *)(VALUE)state;
}
static int
zstream_expand_buffer_without_gvl(struct zstream *z)
{
char * new_str;
long inc, len;
if (RSTRING_LEN(z->buf) - z->buf_filled >= ZSTREAM_AVAIL_OUT_STEP_MAX) {
z->stream.avail_out = ZSTREAM_AVAIL_OUT_STEP_MAX;
}
else {
inc = z->buf_filled / 2;
if (inc < ZSTREAM_AVAIL_OUT_STEP_MIN) {
inc = ZSTREAM_AVAIL_OUT_STEP_MIN;
}
len = z->buf_filled + inc;
new_str = ruby_xrealloc(RSTRING(z->buf)->as.heap.ptr, len + 1);
/* from rb_str_resize */
RSTRING(z->buf)->as.heap.ptr = new_str;
RSTRING(z->buf)->as.heap.ptr[len] = '\0'; /* sentinel */
RSTRING(z->buf)->as.heap.len =
RSTRING(z->buf)->as.heap.aux.capa = len;
z->stream.avail_out = (inc < ZSTREAM_AVAIL_OUT_STEP_MAX) ?
(int)inc : ZSTREAM_AVAIL_OUT_STEP_MAX;
}
z->stream.next_out = (Bytef*)RSTRING_PTR(z->buf) + z->buf_filled;
return ZSTREAM_EXPAND_BUFFER_OK;
}
static void
zstream_append_buffer(struct zstream *z, const Bytef *src, long len)
{
if (NIL_P(z->buf)) {
z->buf = rb_str_buf_new(len);
rb_str_buf_cat(z->buf, (const char*)src, len);
z->buf_filled = len;
z->stream.next_out = (Bytef*)RSTRING_PTR(z->buf);
z->stream.avail_out = 0;
rb_obj_hide(z->buf);
return;
}
if (RSTRING_LEN(z->buf) < z->buf_filled + len) {
rb_str_resize(z->buf, z->buf_filled + len);
z->stream.avail_out = 0;
}
else {
if (z->stream.avail_out >= (uInt)len) {
z->stream.avail_out -= (uInt)len;
}
else {
z->stream.avail_out = 0;
}
}
memcpy(RSTRING_PTR(z->buf) + z->buf_filled, src, len);
z->buf_filled += len;
z->stream.next_out = (Bytef*)RSTRING_PTR(z->buf) + z->buf_filled;
}
#define zstream_append_buffer2(z,v) \
zstream_append_buffer((z),(Bytef*)RSTRING_PTR(v),RSTRING_LEN(v))
static VALUE
zstream_detach_buffer(struct zstream *z)
{
VALUE dst, self = (VALUE)z->stream.opaque;
if (!ZSTREAM_IS_FINISHED(z) && !ZSTREAM_IS_GZFILE(z) &&
rb_block_given_p()) {
/* prevent tiny yields mid-stream, save for next
* zstream_expand_buffer() or stream end */
return Qnil;
}
if (NIL_P(z->buf)) {
dst = rb_str_new(0, 0);
}
else {
dst = z->buf;
rb_str_resize(dst, z->buf_filled);
rb_obj_reveal(dst, rb_cString);
}
OBJ_INFECT(dst, self);
z->buf = Qnil;
z->buf_filled = 0;
z->stream.next_out = 0;
z->stream.avail_out = 0;
if (!ZSTREAM_IS_GZFILE(z) && rb_block_given_p()) {
rb_yield(dst);
dst = Qnil;
}
return dst;
}
static VALUE
zstream_shift_buffer(struct zstream *z, long len)
{
VALUE dst;
long buflen;
if (z->buf_filled <= len) {
return zstream_detach_buffer(z);
}
dst = rb_str_new(RSTRING_PTR(z->buf), len);
z->buf_filled -= len;
memmove(RSTRING_PTR(z->buf), RSTRING_PTR(z->buf) + len,
z->buf_filled);
z->stream.next_out = (Bytef*)RSTRING_PTR(z->buf) + z->buf_filled;
buflen = RSTRING_LEN(z->buf) - z->buf_filled;
if (buflen > ZSTREAM_AVAIL_OUT_STEP_MAX) {
buflen = ZSTREAM_AVAIL_OUT_STEP_MAX;
}
z->stream.avail_out = (uInt)buflen;
return dst;
}
static void
zstream_buffer_ungets(struct zstream *z, const Bytef *b, unsigned long len)
{
if (NIL_P(z->buf) || RSTRING_LEN(z->buf) - z->buf_filled == 0) {
zstream_expand_buffer_into(z, len);
}
memmove(RSTRING_PTR(z->buf) + len, RSTRING_PTR(z->buf), z->buf_filled);
memmove(RSTRING_PTR(z->buf), b, len);
z->buf_filled+=len;
if (z->stream.avail_out > 0) {
if (len > z->stream.avail_out) len = z->stream.avail_out;
z->stream.next_out+=len;
z->stream.avail_out-=(uInt)len;
}
}
static void
zstream_buffer_ungetbyte(struct zstream *z, int c)
{
if (NIL_P(z->buf) || RSTRING_LEN(z->buf) - z->buf_filled == 0) {
zstream_expand_buffer(z);
}
memmove(RSTRING_PTR(z->buf) + 1, RSTRING_PTR(z->buf), z->buf_filled);
RSTRING_PTR(z->buf)[0] = (char)c;
z->buf_filled++;
if (z->stream.avail_out > 0) {
z->stream.next_out++;
z->stream.avail_out--;
}
}
static void
zstream_append_input(struct zstream *z, const Bytef *src, long len)
{
if (len <= 0) return;
if (NIL_P(z->input)) {
z->input = rb_str_buf_new(len);
rb_str_buf_cat(z->input, (const char*)src, len);
rb_obj_hide(z->input);
}
else {
rb_str_buf_cat(z->input, (const char*)src, len);
}
}
#define zstream_append_input2(z,v)\
RB_GC_GUARD(v),\
zstream_append_input((z), (Bytef*)RSTRING_PTR(v), RSTRING_LEN(v))
static void
zstream_discard_input(struct zstream *z, long len)
{
if (NIL_P(z->input) || RSTRING_LEN(z->input) <= len) {
z->input = Qnil;
}
else {
memmove(RSTRING_PTR(z->input), RSTRING_PTR(z->input) + len,
RSTRING_LEN(z->input) - len);
rb_str_resize(z->input, RSTRING_LEN(z->input) - len);
}
}
static void
zstream_reset_input(struct zstream *z)
{
z->input = Qnil;
}
static void
zstream_passthrough_input(struct zstream *z)
{
if (!NIL_P(z->input)) {
zstream_append_buffer2(z, z->input);
z->input = Qnil;
}
}
static VALUE
zstream_detach_input(struct zstream *z)
{
VALUE dst;
if (NIL_P(z->input)) {
dst = rb_str_new(0, 0);
}
else {
dst = z->input;
rb_obj_reveal(dst, rb_cString);
}
z->input = Qnil;
rb_obj_reveal(dst, rb_cString);
return dst;
}
static void
zstream_reset(struct zstream *z)
{
int err;
err = z->func->reset(&z->stream);
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
z->flags = ZSTREAM_FLAG_READY;
z->buf = Qnil;
z->buf_filled = 0;
z->stream.next_out = 0;
z->stream.avail_out = 0;
zstream_reset_input(z);
}
static VALUE
zstream_end(struct zstream *z)
{
int err;
if (!ZSTREAM_IS_READY(z)) {
rb_warning("attempt to close uninitialized zstream; ignored.");
return Qnil;
}
if (z->flags & ZSTREAM_FLAG_IN_STREAM) {
rb_warning("attempt to close unfinished zstream; reset forced.");
zstream_reset(z);
}
zstream_reset_input(z);
err = z->func->end(&z->stream);
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
z->flags = 0;
return Qnil;
}
static void *
zstream_run_func(void *ptr)
{
struct zstream_run_args *args = (struct zstream_run_args *)ptr;
int err, state, flush = args->flush;
struct zstream *z = args->z;
uInt n;
err = Z_OK;
while (!args->interrupt) {
n = z->stream.avail_out;
err = z->func->run(&z->stream, flush);
z->buf_filled += n - z->stream.avail_out;
if (err == Z_STREAM_END) {
z->flags &= ~ZSTREAM_FLAG_IN_STREAM;
z->flags |= ZSTREAM_FLAG_FINISHED;
break;
}
if (err != Z_OK && err != Z_BUF_ERROR)
break;
if (z->stream.avail_out > 0) {
z->flags |= ZSTREAM_FLAG_IN_STREAM;
break;
}
if (z->stream.avail_in == 0 && z->func == &inflate_funcs) {
/* break here because inflate() return Z_BUF_ERROR when avail_in == 0. */
/* but deflate() could be called with avail_in == 0 (there's hidden buffer
in zstream->state) */
z->flags |= ZSTREAM_FLAG_IN_STREAM;
break;
}
if (args->stream_output) {
state = (int)(VALUE)rb_thread_call_with_gvl(zstream_expand_buffer_protect,
(void *)z);
}
else {
state = zstream_expand_buffer_without_gvl(z);
}
if (state) {
err = Z_OK; /* buffer expanded but stream processing was stopped */
args->jump_state = state;
break;
}
}
return (void *)(VALUE)err;
}
/*
* There is no safe way to interrupt z->run->func().
*/
static void
zstream_unblock_func(void *ptr)
{
struct zstream_run_args *args = (struct zstream_run_args *)ptr;
args->interrupt = 1;
}
static void
zstream_run(struct zstream *z, Bytef *src, long len, int flush)
{
struct zstream_run_args args;
int err;
VALUE guard = Qnil;
args.z = z;
args.flush = flush;
args.interrupt = 0;
args.jump_state = 0;
args.stream_output = !ZSTREAM_IS_GZFILE(z) && rb_block_given_p();
if (NIL_P(z->input) && len == 0) {
z->stream.next_in = (Bytef*)"";
z->stream.avail_in = 0;
}
else {
zstream_append_input(z, src, len);
z->stream.next_in = (Bytef*)RSTRING_PTR(z->input);
z->stream.avail_in = MAX_UINT(RSTRING_LEN(z->input));
/* keep reference to `z->input' so as not to be garbage collected
after zstream_reset_input() and prevent `z->stream.next_in'
from dangling. */
guard = z->input;
}
if (z->stream.avail_out == 0) {
zstream_expand_buffer(z);
}
loop:
err = (int)(VALUE)rb_thread_call_without_gvl(zstream_run_func, (void *)&args,
zstream_unblock_func, (void *)&args);
if (flush != Z_FINISH && err == Z_BUF_ERROR
&& z->stream.avail_out > 0) {
z->flags |= ZSTREAM_FLAG_IN_STREAM;
}
zstream_reset_input(z);
if (err != Z_OK && err != Z_STREAM_END) {
if (z->stream.avail_in > 0) {
zstream_append_input(z, z->stream.next_in, z->stream.avail_in);
}
if (err == Z_NEED_DICT) {
VALUE self = (VALUE)z->stream.opaque;
if (self) {
VALUE dicts = rb_ivar_get(self, id_dictionaries);
VALUE dict = rb_hash_aref(dicts, rb_uint2inum(z->stream.adler));
if (!NIL_P(dict)) {
rb_inflate_set_dictionary(self, dict);
goto loop;
}
}
}
raise_zlib_error(err, z->stream.msg);
}
if (z->stream.avail_in > 0) {
zstream_append_input(z, z->stream.next_in, z->stream.avail_in);
RB_GC_GUARD(guard); /* prevent tail call to make guard effective */
}
if (args.jump_state)
rb_jump_tag(args.jump_state);
}
static VALUE
zstream_sync(struct zstream *z, Bytef *src, long len)
{
/* VALUE rest; */
int err;
if (!NIL_P(z->input)) {
z->stream.next_in = (Bytef*)RSTRING_PTR(z->input);
z->stream.avail_in = MAX_UINT(RSTRING_LEN(z->input));
err = inflateSync(&z->stream);
if (err == Z_OK) {
zstream_discard_input(z,
RSTRING_LEN(z->input) - z->stream.avail_in);
zstream_append_input(z, src, len);
return Qtrue;
}
zstream_reset_input(z);
if (err != Z_DATA_ERROR) {
/* rest = rb_str_new((char*)z->stream.next_in, z->stream.avail_in); */
raise_zlib_error(err, z->stream.msg);
}
}
if (len <= 0) return Qfalse;
z->stream.next_in = src;
z->stream.avail_in = MAX_UINT(len);
err = inflateSync(&z->stream);
if (err == Z_OK) {
zstream_append_input(z, z->stream.next_in, z->stream.avail_in);
return Qtrue;
}
if (err != Z_DATA_ERROR) {
/* rest = rb_str_new((char*)z->stream.next_in, z->stream.avail_in); */
raise_zlib_error(err, z->stream.msg);
}
return Qfalse;
}
static void
zstream_mark(void *p)
{
struct zstream *z = p;
rb_gc_mark(z->buf);
rb_gc_mark(z->input);
}
static void
zstream_finalize(struct zstream *z)
{
int err = z->func->end(&z->stream);
if (err == Z_STREAM_ERROR)
finalizer_warn("the stream state was inconsistent.");
if (err == Z_DATA_ERROR)
finalizer_warn("the stream was freed prematurely.");
}
static void
zstream_free(void *p)
{
struct zstream *z = p;
if (ZSTREAM_IS_READY(z)) {
zstream_finalize(z);
}
xfree(z);
}
static size_t
zstream_memsize(const void *p)
{
/* n.b. this does not track memory managed via zalloc/zfree callbacks */
return sizeof(struct zstream);
}
static const rb_data_type_t zstream_data_type = {
"zstream",
{ zstream_mark, zstream_free, zstream_memsize, },
0, 0, RUBY_TYPED_FREE_IMMEDIATELY
};
static VALUE
zstream_new(VALUE klass, const struct zstream_funcs *funcs)
{
VALUE obj;
struct zstream *z;
obj = TypedData_Make_Struct(klass, struct zstream, &zstream_data_type, z);
zstream_init(z, funcs);
z->stream.opaque = (voidpf)obj;
return obj;
}
#define zstream_deflate_new(klass) zstream_new((klass), &deflate_funcs)
#define zstream_inflate_new(klass) zstream_new((klass), &inflate_funcs)
static struct zstream *
get_zstream(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
if (!ZSTREAM_IS_READY(z)) {
rb_raise(cZError, "stream is not ready");
}
return z;
}
/* ------------------------------------------------------------------------- */
/*
* Document-class: Zlib::ZStream
*
* Zlib::ZStream is the abstract class for the stream which handles the
* compressed data. The operations are defined in the subclasses:
* Zlib::Deflate for compression, and Zlib::Inflate for decompression.
*
* An instance of Zlib::ZStream has one stream (struct zstream in the source)
* and two variable-length buffers which associated to the input (next_in) of
* the stream and the output (next_out) of the stream. In this document,
* "input buffer" means the buffer for input, and "output buffer" means the
* buffer for output.
*
* Data input into an instance of Zlib::ZStream are temporally stored into
* the end of input buffer, and then data in input buffer are processed from
* the beginning of the buffer until no more output from the stream is
* produced (i.e. until avail_out > 0 after processing). During processing,
* output buffer is allocated and expanded automatically to hold all output
* data.
*
* Some particular instance methods consume the data in output buffer and
* return them as a String.
*
* Here is an ascii art for describing above:
*
* +================ an instance of Zlib::ZStream ================+
* || ||
* || +--------+ +-------+ +--------+ ||
* || +--| output |<---------|zstream|<---------| input |<--+ ||
* || | | buffer | next_out+-------+next_in | buffer | | ||
* || | +--------+ +--------+ | ||
* || | | ||
* +===|======================================================|===+
* | |
* v |
* "output data" "input data"
*
* If an error occurs during processing input buffer, an exception which is a
* subclass of Zlib::Error is raised. At that time, both input and output
* buffer keep their conditions at the time when the error occurs.
*
* == Method Catalogue
*
* Many of the methods in this class are fairly low-level and unlikely to be
* of interest to users. In fact, users are unlikely to use this class
* directly; rather they will be interested in Zlib::Inflate and
* Zlib::Deflate.
*
* The higher level methods are listed below.
*
* - #total_in
* - #total_out
* - #data_type
* - #adler
* - #reset
* - #finish
* - #finished?
* - #close
* - #closed?
*/
/*
* Closes the stream. All operations on the closed stream will raise an
* exception.
*/
static VALUE
rb_zstream_end(VALUE obj)
{
zstream_end(get_zstream(obj));
return Qnil;
}
/*
* Resets and initializes the stream. All data in both input and output buffer
* are discarded.
*/
static VALUE
rb_zstream_reset(VALUE obj)
{
zstream_reset(get_zstream(obj));
return Qnil;
}
/*
* call-seq:
* finish -> String
* finish { |chunk| ... } -> nil
*
* Finishes the stream and flushes output buffer. If a block is given each
* chunk is yielded to the block until the input buffer has been flushed to
* the output buffer.
*/
static VALUE
rb_zstream_finish(VALUE obj)
{
struct zstream *z = get_zstream(obj);
zstream_run(z, (Bytef*)"", 0, Z_FINISH);
return zstream_detach_buffer(z);
}
/*
* call-seq:
* flush_next_in -> input
*
*/
static VALUE
rb_zstream_flush_next_in(VALUE obj)
{
struct zstream *z;
VALUE dst;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
dst = zstream_detach_input(z);
OBJ_INFECT(dst, obj);
return dst;
}
/*
* call-seq:
* flush_next_out -> String
* flush_next_out { |chunk| ... } -> nil
*
* Flushes output buffer and returns all data in that buffer. If a block is
* given each chunk is yielded to the block until the current output buffer
* has been flushed.
*/
static VALUE
rb_zstream_flush_next_out(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return zstream_detach_buffer(z);
}
/*
* Returns number of bytes of free spaces in output buffer. Because the free
* space is allocated automatically, this method returns 0 normally.
*/
static VALUE
rb_zstream_avail_out(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return rb_uint2inum(z->stream.avail_out);
}
/*
* Allocates +size+ bytes of free space in the output buffer. If there are more
* than +size+ bytes already in the buffer, the buffer is truncated. Because
* free space is allocated automatically, you usually don't need to use this
* method.
*/
static VALUE
rb_zstream_set_avail_out(VALUE obj, VALUE size)
{
struct zstream *z = get_zstream(obj);
Check_Type(size, T_FIXNUM);
zstream_expand_buffer_into(z, FIX2INT(size));
return size;
}
/*
* Returns bytes of data in the input buffer. Normally, returns 0.
*/
static VALUE
rb_zstream_avail_in(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return INT2FIX(NIL_P(z->input) ? 0 : (int)(RSTRING_LEN(z->input)));
}
/*
* Returns the total bytes of the input data to the stream. FIXME
*/
static VALUE
rb_zstream_total_in(VALUE obj)
{
return rb_uint2inum(get_zstream(obj)->stream.total_in);
}
/*
* Returns the total bytes of the output data from the stream. FIXME
*/
static VALUE
rb_zstream_total_out(VALUE obj)
{
return rb_uint2inum(get_zstream(obj)->stream.total_out);
}
/*
* Guesses the type of the data which have been inputed into the stream. The
* returned value is either <tt>BINARY</tt>, <tt>ASCII</tt>, or
* <tt>UNKNOWN</tt>.
*/
static VALUE
rb_zstream_data_type(VALUE obj)
{
return INT2FIX(get_zstream(obj)->stream.data_type);
}
/*
* Returns the adler-32 checksum.
*/
static VALUE
rb_zstream_adler(VALUE obj)
{
return rb_uint2inum(get_zstream(obj)->stream.adler);
}
/*
* Returns true if the stream is finished.
*/
static VALUE
rb_zstream_finished_p(VALUE obj)
{
return ZSTREAM_IS_FINISHED(get_zstream(obj)) ? Qtrue : Qfalse;
}
/*
* Returns true if the stream is closed.
*/
static VALUE
rb_zstream_closed_p(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return ZSTREAM_IS_READY(z) ? Qfalse : Qtrue;
}
/* ------------------------------------------------------------------------- */
/*
* Document-class: Zlib::Deflate
*
* Zlib::Deflate is the class for compressing data. See Zlib::ZStream for more
* information.
*/
#define FIXNUMARG(val, ifnil) \
(NIL_P((val)) ? (ifnil) \
: ((void)Check_Type((val), T_FIXNUM), FIX2INT((val))))
#define ARG_LEVEL(val) FIXNUMARG((val), Z_DEFAULT_COMPRESSION)
#define ARG_WBITS(val) FIXNUMARG((val), MAX_WBITS)
#define ARG_MEMLEVEL(val) FIXNUMARG((val), DEF_MEM_LEVEL)
#define ARG_STRATEGY(val) FIXNUMARG((val), Z_DEFAULT_STRATEGY)
#define ARG_FLUSH(val) FIXNUMARG((val), Z_NO_FLUSH)
static VALUE
rb_deflate_s_allocate(VALUE klass)
{
return zstream_deflate_new(klass);
}
/*
* Document-method: Zlib::Deflate.new
*
* call-seq:
* Zlib::Deflate.new(level=DEFAULT_COMPRESSION, window_bits=MAX_WBITS, mem_level=DEF_MEM_LEVEL, strategy=DEFAULT_STRATEGY)
*
* Creates a new deflate stream for compression. If a given argument is nil,
* the default value of that argument is used.
*
* The +level+ sets the compression level for the deflate stream between 0 (no
* compression) and 9 (best compression). The following constants have been
* defined to make code more readable:
*
* * Zlib::DEFAULT_COMPRESSION
* * Zlib::NO_COMPRESSION
* * Zlib::BEST_SPEED
* * Zlib::BEST_COMPRESSION
*
* See http://www.zlib.net/manual.html#Constants for further information.
*
* The +window_bits+ sets the size of the history buffer and should be between
* 8 and 15. Larger values of this parameter result in better compression at
* the expense of memory usage.
*
* The +mem_level+ specifies how much memory should be allocated for the
* internal compression state. 1 uses minimum memory but is slow and reduces
* compression ratio while 9 uses maximum memory for optimal speed. The
* default value is 8. Two constants are defined:
*
* * Zlib::DEF_MEM_LEVEL
* * Zlib::MAX_MEM_LEVEL
*
* The +strategy+ sets the deflate compression strategy. The following
* strategies are available:
*
* Zlib::DEFAULT_STRATEGY:: For normal data
* Zlib::FILTERED:: For data produced by a filter or predictor
* Zlib::FIXED:: Prevents dynamic Huffman codes
* Zlib::HUFFMAN_ONLY:: Prevents string matching
* Zlib::RLE:: Designed for better compression of PNG image data
*
* See the constants for further description.
*
* == Examples
*
* === Basic
*
* open "compressed.file", "w+" do |io|
* io << Zlib::Deflate.new.deflate(File.read("big.file"))
* end
*
* === Custom compression
*
* open "compressed.file", "w+" do |compressed_io|
* deflate = Zlib::Deflate.new(Zlib::BEST_COMPRESSION,
* Zlib::MAX_WBITS,
* Zlib::MAX_MEM_LEVEL,
* Zlib::HUFFMAN_ONLY)
*
* begin
* open "big.file" do |big_io|
* until big_io.eof? do
* compressed_io << zd.deflate(big_io.read(16384))
* end
* end
* ensure
* deflate.close
* end
* end
*
* While this example will work, for best optimization review the flags for
* your specific time, memory usage and output space requirements.
*/
static VALUE
rb_deflate_initialize(int argc, VALUE *argv, VALUE obj)
{
struct zstream *z;
VALUE level, wbits, memlevel, strategy;
int err;
rb_scan_args(argc, argv, "04", &level, &wbits, &memlevel, &strategy);
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
err = deflateInit2(&z->stream, ARG_LEVEL(level), Z_DEFLATED,
ARG_WBITS(wbits), ARG_MEMLEVEL(memlevel),
ARG_STRATEGY(strategy));
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
ZSTREAM_READY(z);
return obj;
}
/*
* Document-method: Zlib::Deflate#initialize_copy
*
* Duplicates the deflate stream.
*/
static VALUE
rb_deflate_init_copy(VALUE self, VALUE orig)
{
struct zstream *z1, *z2;
int err;
TypedData_Get_Struct(self, struct zstream, &zstream_data_type, z1);
z2 = get_zstream(orig);
if (z1 == z2) return self;
err = deflateCopy(&z1->stream, &z2->stream);
if (err != Z_OK) {
raise_zlib_error(err, 0);
}
z1->input = NIL_P(z2->input) ? Qnil : rb_str_dup(z2->input);
z1->buf = NIL_P(z2->buf) ? Qnil : rb_str_dup(z2->buf);
z1->buf_filled = z2->buf_filled;
z1->flags = z2->flags;
return self;
}
static VALUE
deflate_run(VALUE args)
{
struct zstream *z = (struct zstream*)((VALUE*)args)[0];
VALUE src = ((VALUE*)args)[1];
zstream_run(z, (Bytef*)RSTRING_PTR(src), RSTRING_LEN(src), Z_FINISH);
return zstream_detach_buffer(z);
}
/*
* Document-method: Zlib::Deflate.deflate
*
* call-seq:
* Zlib.deflate(string[, level])
* Zlib::Deflate.deflate(string[, level])
*
* Compresses the given +string+. Valid values of level are
* Zlib::NO_COMPRESSION, Zlib::BEST_SPEED, Zlib::BEST_COMPRESSION,
* Zlib::DEFAULT_COMPRESSION, or an integer from 0 to 9.
*
* This method is almost equivalent to the following code:
*
* def deflate(string, level)
* z = Zlib::Deflate.new(level)
* dst = z.deflate(string, Zlib::FINISH)
* z.close
* dst
* end
*
* See also Zlib.inflate
*
*/
static VALUE
rb_deflate_s_deflate(int argc, VALUE *argv, VALUE klass)
{
struct zstream z;
VALUE src, level, dst, args[2];
int err, lev;
rb_scan_args(argc, argv, "11", &src, &level);
lev = ARG_LEVEL(level);
StringValue(src);
zstream_init_deflate(&z);
err = deflateInit(&z.stream, lev);
if (err != Z_OK) {
raise_zlib_error(err, z.stream.msg);
}
ZSTREAM_READY(&z);
args[0] = (VALUE)&z;
args[1] = src;
dst = rb_ensure(deflate_run, (VALUE)args, zstream_end, (VALUE)&z);
OBJ_INFECT(dst, src);
return dst;
}
static void
do_deflate(struct zstream *z, VALUE src, int flush)
{
if (NIL_P(src)) {
zstream_run(z, (Bytef*)"", 0, Z_FINISH);
return;
}
StringValue(src);
if (flush != Z_NO_FLUSH || RSTRING_LEN(src) > 0) { /* prevent BUF_ERROR */
zstream_run(z, (Bytef*)RSTRING_PTR(src), RSTRING_LEN(src), flush);
}
}
/*
* Document-method: Zlib::Deflate#deflate
*
* call-seq:
* z.deflate(string, flush = Zlib::NO_FLUSH) -> String
* z.deflate(string, flush = Zlib::NO_FLUSH) { |chunk| ... } -> nil
*
* Inputs +string+ into the deflate stream and returns the output from the
* stream. On calling this method, both the input and the output buffers of
* the stream are flushed. If +string+ is nil, this method finishes the
* stream, just like Zlib::ZStream#finish.
*
* If a block is given consecutive deflated chunks from the +string+ are
* yielded to the block and +nil+ is returned.
*
* The +flush+ parameter specifies the flush mode. The following constants
* may be used:
*
* Zlib::NO_FLUSH:: The default
* Zlib::SYNC_FLUSH:: Flushes the output to a byte boundary
* Zlib::FULL_FLUSH:: SYNC_FLUSH + resets the compression state
* Zlib::FINISH:: Pending input is processed, pending output is flushed.
*
* See the constants for further description.
*
*/
static VALUE
rb_deflate_deflate(int argc, VALUE *argv, VALUE obj)
{
struct zstream *z = get_zstream(obj);
VALUE src, flush;
rb_scan_args(argc, argv, "11", &src, &flush);
OBJ_INFECT(obj, src);
do_deflate(z, src, ARG_FLUSH(flush));
return zstream_detach_buffer(z);
}
/*
* Document-method: Zlib::Deflate#<<
*
* call-seq: << string
*
* Inputs +string+ into the deflate stream just like Zlib::Deflate#deflate, but
* returns the Zlib::Deflate object itself. The output from the stream is
* preserved in output buffer.
*/
static VALUE
rb_deflate_addstr(VALUE obj, VALUE src)
{
OBJ_INFECT(obj, src);
do_deflate(get_zstream(obj), src, Z_NO_FLUSH);
return obj;
}
/*
* Document-method: Zlib::Deflate#flush
*
* call-seq:
* flush(flush = Zlib::SYNC_FLUSH) -> String
* flush(flush = Zlib::SYNC_FLUSH) { |chunk| ... } -> nil
*
* This method is equivalent to <tt>deflate('', flush)</tt>. This method is
* just provided to improve the readability of your Ruby program. If a block
* is given chunks of deflate output are yielded to the block until the buffer
* is flushed.
*
* See Zlib::Deflate#deflate for detail on the +flush+ constants NO_FLUSH,
* SYNC_FLUSH, FULL_FLUSH and FINISH.
*/
static VALUE
rb_deflate_flush(int argc, VALUE *argv, VALUE obj)
{
struct zstream *z = get_zstream(obj);
VALUE v_flush;
int flush;
rb_scan_args(argc, argv, "01", &v_flush);
flush = FIXNUMARG(v_flush, Z_SYNC_FLUSH);
if (flush != Z_NO_FLUSH) { /* prevent Z_BUF_ERROR */
zstream_run(z, (Bytef*)"", 0, flush);
}
return zstream_detach_buffer(z);
}
/*
* Document-method: Zlib::Deflate.params
*
* call-seq: params(level, strategy)
*
* Changes the parameters of the deflate stream to allow changes between
* different types of data that require different types of compression. Any
* unprocessed data is flushed before changing the params.
*
* See Zlib::Deflate.new for a description of +level+ and +strategy+.
*
*/
static VALUE
rb_deflate_params(VALUE obj, VALUE v_level, VALUE v_strategy)
{
struct zstream *z = get_zstream(obj);
int level, strategy;
int err;
uInt n;
level = ARG_LEVEL(v_level);
strategy = ARG_STRATEGY(v_strategy);
n = z->stream.avail_out;
err = deflateParams(&z->stream, level, strategy);
z->buf_filled += n - z->stream.avail_out;
while (err == Z_BUF_ERROR) {
rb_warning("deflateParams() returned Z_BUF_ERROR");
zstream_expand_buffer(z);
n = z->stream.avail_out;
err = deflateParams(&z->stream, level, strategy);
z->buf_filled += n - z->stream.avail_out;
}
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
return Qnil;
}
/*
* Document-method: Zlib::Deflate.set_dictionary
*
* call-seq: set_dictionary(string)
*
* Sets the preset dictionary and returns +string+. This method is available
* just only after Zlib::Deflate.new or Zlib::ZStream#reset method was called.
* See zlib.h for details.
*
* Can raise errors of Z_STREAM_ERROR if a parameter is invalid (such as
* NULL dictionary) or the stream state is inconsistent, Z_DATA_ERROR if
* the given dictionary doesn't match the expected one (incorrect adler32 value)
*
*/
static VALUE
rb_deflate_set_dictionary(VALUE obj, VALUE dic)
{
struct zstream *z = get_zstream(obj);
VALUE src = dic;
int err;
OBJ_INFECT(obj, dic);
StringValue(src);
err = deflateSetDictionary(&z->stream,
(Bytef*)RSTRING_PTR(src), RSTRING_LENINT(src));
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
return dic;
}
/* ------------------------------------------------------------------------- */
/*
* Document-class: Zlib::Inflate
*
* Zlib:Inflate is the class for decompressing compressed data. Unlike
* Zlib::Deflate, an instance of this class is not able to duplicate (clone,
* dup) itself.
*/
static VALUE
rb_inflate_s_allocate(VALUE klass)
{
VALUE inflate = zstream_inflate_new(klass);
rb_ivar_set(inflate, id_dictionaries, rb_hash_new());
return inflate;
}
/*
* Document-method: Zlib::Inflate.new
*
* call-seq:
* Zlib::Inflate.new(window_bits = Zlib::MAX_WBITS)
*
* Creates a new inflate stream for decompression. +window_bits+ sets the
* size of the history buffer and can have the following values:
*
* 0::
* Have inflate use the window size from the zlib header of the compressed
* stream.
*
* (8..15)::
* Overrides the window size of the inflate header in the compressed stream.
* The window size must be greater than or equal to the window size of the
* compressed stream.
*
* Greater than 15::
* Add 32 to window_bits to enable zlib and gzip decoding with automatic
* header detection, or add 16 to decode only the gzip format (a
* Zlib::DataError will be raised for a non-gzip stream).
*
* (-8..-15)::
* Enables raw deflate mode which will not generate a check value, and will
* not look for any check values for comparison at the end of the stream.
*
* This is for use with other formats that use the deflate compressed data
* format such as zip which provide their own check values.
*
* == Example
*
* open "compressed.file" do |compressed_io|
* zi = Zlib::Inflate.new(Zlib::MAX_WBITS + 32)
*
* begin
* open "uncompressed.file", "w+" do |uncompressed_io|
* uncompressed_io << zi.inflate(compressed_io.read)
* end
* ensure
* zi.close
* end
* end
*
*/
static VALUE
rb_inflate_initialize(int argc, VALUE *argv, VALUE obj)
{
struct zstream *z;
VALUE wbits;
int err;
rb_scan_args(argc, argv, "01", &wbits);
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
err = inflateInit2(&z->stream, ARG_WBITS(wbits));
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
ZSTREAM_READY(z);
return obj;
}
static VALUE
inflate_run(VALUE args)
{
struct zstream *z = (struct zstream*)((VALUE*)args)[0];
VALUE src = ((VALUE*)args)[1];
zstream_run(z, (Bytef*)RSTRING_PTR(src), RSTRING_LEN(src), Z_SYNC_FLUSH);
zstream_run(z, (Bytef*)"", 0, Z_FINISH); /* for checking errors */
return zstream_detach_buffer(z);
}
/*
* Document-method: Zlib::inflate
*
* call-seq:
* Zlib.inflate(string)
* Zlib::Inflate.inflate(string)
*
* Decompresses +string+. Raises a Zlib::NeedDict exception if a preset
* dictionary is needed for decompression.
*
* This method is almost equivalent to the following code:
*
* def inflate(string)
* zstream = Zlib::Inflate.new
* buf = zstream.inflate(string)
* zstream.finish
* zstream.close
* buf
* end
*
* See also Zlib.deflate
*
*/
static VALUE
rb_inflate_s_inflate(VALUE obj, VALUE src)
{
struct zstream z;
VALUE dst, args[2];
int err;
StringValue(src);
zstream_init_inflate(&z);
err = inflateInit(&z.stream);
if (err != Z_OK) {
raise_zlib_error(err, z.stream.msg);
}
ZSTREAM_READY(&z);
args[0] = (VALUE)&z;
args[1] = src;
dst = rb_ensure(inflate_run, (VALUE)args, zstream_end, (VALUE)&z);
OBJ_INFECT(dst, src);
return dst;
}
static void
do_inflate(struct zstream *z, VALUE src)
{
if (NIL_P(src)) {
zstream_run(z, (Bytef*)"", 0, Z_FINISH);
return;
}
StringValue(src);
if (RSTRING_LEN(src) > 0 || z->stream.avail_in > 0) { /* prevent Z_BUF_ERROR */
zstream_run(z, (Bytef*)RSTRING_PTR(src), RSTRING_LEN(src), Z_SYNC_FLUSH);
}
}
/* Document-method: Zlib::Inflate#add_dictionary
*
* call-seq: add_dictionary(string)
*
* Provide the inflate stream with a dictionary that may be required in the
* future. Multiple dictionaries may be provided. The inflate stream will
* automatically choose the correct user-provided dictionary based on the
* stream's required dictionary.
*/
static VALUE
rb_inflate_add_dictionary(VALUE obj, VALUE dictionary)
{
VALUE dictionaries = rb_ivar_get(obj, id_dictionaries);
VALUE checksum = do_checksum(1, &dictionary, adler32);
rb_hash_aset(dictionaries, checksum, dictionary);
return obj;
}
/*
* Document-method: Zlib::Inflate#inflate
*
* call-seq:
* inflate(deflate_string) -> String
* inflate(deflate_string) { |chunk| ... } -> nil
*
* Inputs +deflate_string+ into the inflate stream and returns the output from
* the stream. Calling this method, both the input and the output buffer of
* the stream are flushed. If string is +nil+, this method finishes the
* stream, just like Zlib::ZStream#finish.
*
* If a block is given consecutive inflated chunks from the +deflate_string+
* are yielded to the block and +nil+ is returned.
*
* Raises a Zlib::NeedDict exception if a preset dictionary is needed to
* decompress. Set the dictionary by Zlib::Inflate#set_dictionary and then
* call this method again with an empty string to flush the stream:
*
* inflater = Zlib::Inflate.new
*
* begin
* out = inflater.inflate compressed
* rescue Zlib::NeedDict
* # ensure the dictionary matches the stream's required dictionary
* raise unless inflater.adler == Zlib.adler32(dictionary)
*
* inflater.set_dictionary dictionary
* inflater.inflate ''
* end
*
* # ...
*
* inflater.close
*
* See also Zlib::Inflate.new
*/
static VALUE
rb_inflate_inflate(VALUE obj, VALUE src)
{
struct zstream *z = get_zstream(obj);
VALUE dst;
OBJ_INFECT(obj, src);
if (ZSTREAM_IS_FINISHED(z)) {
if (NIL_P(src)) {
dst = zstream_detach_buffer(z);
}
else {
StringValue(src);
zstream_append_buffer2(z, src);
dst = rb_str_new(0, 0);
OBJ_INFECT(dst, obj);
}
}
else {
do_inflate(z, src);
dst = zstream_detach_buffer(z);
if (ZSTREAM_IS_FINISHED(z)) {
zstream_passthrough_input(z);
}
}
return dst;
}
/*
* call-seq: << string
*
* Inputs +string+ into the inflate stream just like Zlib::Inflate#inflate, but
* returns the Zlib::Inflate object itself. The output from the stream is
* preserved in output buffer.
*/
static VALUE
rb_inflate_addstr(VALUE obj, VALUE src)
{
struct zstream *z = get_zstream(obj);
OBJ_INFECT(obj, src);
if (ZSTREAM_IS_FINISHED(z)) {
if (!NIL_P(src)) {
StringValue(src);
zstream_append_buffer2(z, src);
}
}
else {
do_inflate(z, src);
if (ZSTREAM_IS_FINISHED(z)) {
zstream_passthrough_input(z);
}
}
return obj;
}
/*
* call-seq: sync(string)
*
* Inputs +string+ into the end of input buffer and skips data until a full
* flush point can be found. If the point is found in the buffer, this method
* flushes the buffer and returns false. Otherwise it returns +true+ and the
* following data of full flush point is preserved in the buffer.
*/
static VALUE
rb_inflate_sync(VALUE obj, VALUE src)
{
struct zstream *z = get_zstream(obj);
OBJ_INFECT(obj, src);
StringValue(src);
return zstream_sync(z, (Bytef*)RSTRING_PTR(src), RSTRING_LEN(src));
}
/*
* Quoted verbatim from original documentation:
*
* What is this?
*
* <tt>:)</tt>
*/
static VALUE
rb_inflate_sync_point_p(VALUE obj)
{
struct zstream *z = get_zstream(obj);
int err;
err = inflateSyncPoint(&z->stream);
if (err == 1) {
return Qtrue;
}
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
return Qfalse;
}
/*
* Document-method: Zlib::Inflate#set_dictionary
*
* Sets the preset dictionary and returns +string+. This method is available just
* only after a Zlib::NeedDict exception was raised. See zlib.h for details.
*
*/
static VALUE
rb_inflate_set_dictionary(VALUE obj, VALUE dic)
{
struct zstream *z = get_zstream(obj);
VALUE src = dic;
int err;
OBJ_INFECT(obj, dic);
StringValue(src);
err = inflateSetDictionary(&z->stream,
(Bytef*)RSTRING_PTR(src), RSTRING_LENINT(src));
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
return dic;
}
#if GZIP_SUPPORT
/* NOTE: Features for gzip files of Ruby/zlib are written from scratch
* and using undocumented feature of zlib, negative wbits.
* I don't think gzFile APIs of zlib are good for Ruby.
*/
/*------- .gz file header --------*/
#define GZ_MAGIC1 0x1f
#define GZ_MAGIC2 0x8b
#define GZ_METHOD_DEFLATE 8
#define GZ_FLAG_MULTIPART 0x2
#define GZ_FLAG_EXTRA 0x4
#define GZ_FLAG_ORIG_NAME 0x8
#define GZ_FLAG_COMMENT 0x10
#define GZ_FLAG_ENCRYPT 0x20
#define GZ_FLAG_UNKNOWN_MASK 0xc0
#define GZ_EXTRAFLAG_FAST 0x4
#define GZ_EXTRAFLAG_SLOW 0x2
/* from zutil.h */
#define OS_MSDOS 0x00
#define OS_AMIGA 0x01
#define OS_VMS 0x02
#define OS_UNIX 0x03
#define OS_ATARI 0x05
#define OS_OS2 0x06
#define OS_MACOS 0x07
#define OS_TOPS20 0x0a
#define OS_WIN32 0x0b
#define OS_VMCMS 0x04
#define OS_ZSYSTEM 0x08
#define OS_CPM 0x09
#define OS_QDOS 0x0c
#define OS_RISCOS 0x0d
#define OS_UNKNOWN 0xff
#ifndef OS_CODE
#define OS_CODE OS_UNIX
#endif
static ID id_write, id_read, id_readpartial, id_flush, id_seek, id_close, id_path, id_input;
static VALUE cGzError, cNoFooter, cCRCError, cLengthError;
/*-------- gzfile internal APIs --------*/
struct gzfile {
struct zstream z;
VALUE io;
int level;
int os_code; /* for header */
time_t mtime; /* for header */
VALUE orig_name; /* for header; must be a String */
VALUE comment; /* for header; must be a String */
unsigned long crc;
int ecflags;
int lineno;
long ungetc;
void (*end)(struct gzfile *);
rb_encoding *enc;
rb_encoding *enc2;
rb_econv_t *ec;
VALUE ecopts;
char *cbuf;
VALUE path;
};
#define GZFILE_CBUF_CAPA 10
#define GZFILE_FLAG_SYNC ZSTREAM_FLAG_UNUSED
#define GZFILE_FLAG_HEADER_FINISHED (ZSTREAM_FLAG_UNUSED << 1)
#define GZFILE_FLAG_FOOTER_FINISHED (ZSTREAM_FLAG_UNUSED << 2)
#define GZFILE_IS_FINISHED(gz) \
(ZSTREAM_IS_FINISHED(&(gz)->z) && (gz)->z.buf_filled == 0)
#define GZFILE_READ_SIZE 2048
static void
gzfile_mark(void *p)
{
struct gzfile *gz = p;
rb_gc_mark(gz->io);
rb_gc_mark(gz->orig_name);
rb_gc_mark(gz->comment);
zstream_mark(&gz->z);
rb_gc_mark(gz->ecopts);
rb_gc_mark(gz->path);
}
static void
gzfile_free(void *p)
{
struct gzfile *gz = p;
struct zstream *z = &gz->z;
if (ZSTREAM_IS_READY(z)) {
if (z->func == &deflate_funcs) {
finalizer_warn("Zlib::GzipWriter object must be closed explicitly.");
}
zstream_finalize(z);
}
if (gz->cbuf) {
xfree(gz->cbuf);
}
xfree(gz);
}
static size_t
gzfile_memsize(const void *p)
{
const struct gzfile *gz = p;
size_t size = sizeof(struct gzfile);
if (gz->cbuf)
size += GZFILE_CBUF_CAPA;
return size;
}
static const rb_data_type_t gzfile_data_type = {
"gzfile",
{ gzfile_mark, gzfile_free, gzfile_memsize, },
0, 0, RUBY_TYPED_FREE_IMMEDIATELY
};
static VALUE
gzfile_new(klass, funcs, endfunc)
VALUE klass;
const struct zstream_funcs *funcs;
void (*endfunc)(struct gzfile *);
{
VALUE obj;
struct gzfile *gz;
obj = TypedData_Make_Struct(klass, struct gzfile, &gzfile_data_type, gz);
zstream_init(&gz->z, funcs);
gz->z.flags |= ZSTREAM_FLAG_GZFILE;
gz->io = Qnil;
gz->level = 0;
gz->mtime = 0;
gz->os_code = OS_CODE;
gz->orig_name = Qnil;
gz->comment = Qnil;
gz->crc = crc32(0, Z_NULL, 0);
gz->lineno = 0;
gz->ungetc = 0;
gz->end = endfunc;
gz->enc = rb_default_external_encoding();
gz->enc2 = 0;
gz->ec = NULL;
gz->ecflags = 0;
gz->ecopts = Qnil;
gz->cbuf = 0;
gz->path = Qnil;
return obj;
}
#define gzfile_writer_new(gz) gzfile_new((gz),&deflate_funcs,gzfile_writer_end)
#define gzfile_reader_new(gz) gzfile_new((gz),&inflate_funcs,gzfile_reader_end)
static void
gzfile_reset(struct gzfile *gz)
{
zstream_reset(&gz->z);
gz->z.flags |= ZSTREAM_FLAG_GZFILE;
gz->crc = crc32(0, Z_NULL, 0);
gz->lineno = 0;
gz->ungetc = 0;
if (gz->ec) {
rb_econv_close(gz->ec);
gz->ec = rb_econv_open_opts(gz->enc2->name, gz->enc->name,
gz->ecflags, gz->ecopts);
}
}
static void
gzfile_close(struct gzfile *gz, int closeflag)
{
VALUE io = gz->io;
gz->end(gz);
gz->io = Qnil;
gz->orig_name = Qnil;
gz->comment = Qnil;
if (closeflag && rb_respond_to(io, id_close)) {
rb_funcall(io, id_close, 0);
}
}
static void
gzfile_write_raw(struct gzfile *gz)
{
VALUE str;
if (gz->z.buf_filled > 0) {
str = zstream_detach_buffer(&gz->z);
OBJ_TAINT(str); /* for safe */
rb_funcall(gz->io, id_write, 1, str);
if ((gz->z.flags & GZFILE_FLAG_SYNC)
&& rb_respond_to(gz->io, id_flush))
rb_funcall(gz->io, id_flush, 0);
}
}
static VALUE
gzfile_read_raw_partial(VALUE arg)
{
struct gzfile *gz = (struct gzfile*)arg;
VALUE str;
str = rb_funcall(gz->io, id_readpartial, 1, INT2FIX(GZFILE_READ_SIZE));
Check_Type(str, T_STRING);
return str;
}
static VALUE
gzfile_read_raw_rescue(VALUE arg)
{
struct gzfile *gz = (struct gzfile*)arg;
VALUE str = Qnil;
if (rb_obj_is_kind_of(rb_errinfo(), rb_eNoMethodError)) {
str = rb_funcall(gz->io, id_read, 1, INT2FIX(GZFILE_READ_SIZE));
if (!NIL_P(str)) {
Check_Type(str, T_STRING);
}
}
return str; /* return nil when EOFError */
}
static VALUE
gzfile_read_raw(struct gzfile *gz)
{
return rb_rescue2(gzfile_read_raw_partial, (VALUE)gz,
gzfile_read_raw_rescue, (VALUE)gz,
rb_eEOFError, rb_eNoMethodError, (VALUE)0);
}
static int
gzfile_read_raw_ensure(struct gzfile *gz, long size)
{
VALUE str;
while (NIL_P(gz->z.input) || RSTRING_LEN(gz->z.input) < size) {
str = gzfile_read_raw(gz);
if (NIL_P(str)) return 0;
zstream_append_input2(&gz->z, str);
}
return 1;
}
static char *
gzfile_read_raw_until_zero(struct gzfile *gz, long offset)
{
VALUE str;
char *p;
for (;;) {
p = memchr(RSTRING_PTR(gz->z.input) + offset, '\0',
RSTRING_LEN(gz->z.input) - offset);
if (p) break;
str = gzfile_read_raw(gz);
if (NIL_P(str)) {
rb_raise(cGzError, "unexpected end of file");
}
offset = RSTRING_LEN(gz->z.input);
zstream_append_input2(&gz->z, str);
}
return p;
}
static unsigned int
gzfile_get16(const unsigned char *src)
{
unsigned int n;
n = *(src++) & 0xff;
n |= (*(src++) & 0xff) << 8;
return n;
}
static unsigned long
gzfile_get32(const unsigned char *src)
{
unsigned long n;
n = *(src++) & 0xff;
n |= (*(src++) & 0xff) << 8;
n |= (*(src++) & 0xff) << 16;
n |= (*(src++) & 0xffU) << 24;
return n;
}
static void
gzfile_set32(unsigned long n, unsigned char *dst)
{
*(dst++) = n & 0xff;
*(dst++) = (n >> 8) & 0xff;
*(dst++) = (n >> 16) & 0xff;
*dst = (n >> 24) & 0xff;
}
static void
gzfile_raise(struct gzfile *gz, VALUE klass, const char *message)
{
VALUE exc = rb_exc_new2(klass, message);
if (!NIL_P(gz->z.input)) {
rb_ivar_set(exc, id_input, rb_str_resurrect(gz->z.input));
}
rb_exc_raise(exc);
}
/*
* Document-method: Zlib::GzipFile::Error#inspect
*
* Constructs a String of the GzipFile Error
*/
static VALUE
gzfile_error_inspect(VALUE error)
{
VALUE str = rb_call_super(0, 0);
VALUE input = rb_attr_get(error, id_input);
if (!NIL_P(input)) {
rb_str_resize(str, RSTRING_LEN(str)-1);
rb_str_cat2(str, ", input=");
rb_str_append(str, rb_str_inspect(input));
rb_str_cat2(str, ">");
}
return str;
}
static void
gzfile_make_header(struct gzfile *gz)
{
Bytef buf[10]; /* the size of gzip header */
unsigned char flags = 0, extraflags = 0;
if (!NIL_P(gz->orig_name)) {
flags |= GZ_FLAG_ORIG_NAME;
}
if (!NIL_P(gz->comment)) {
flags |= GZ_FLAG_COMMENT;
}
if (gz->mtime == 0) {
gz->mtime = time(0);
}
if (gz->level == Z_BEST_SPEED) {
extraflags |= GZ_EXTRAFLAG_FAST;
}
else if (gz->level == Z_BEST_COMPRESSION) {
extraflags |= GZ_EXTRAFLAG_SLOW;
}
buf[0] = GZ_MAGIC1;
buf[1] = GZ_MAGIC2;
buf[2] = GZ_METHOD_DEFLATE;
buf[3] = flags;
gzfile_set32((unsigned long)gz->mtime, &buf[4]);
buf[8] = extraflags;
buf[9] = gz->os_code;
zstream_append_buffer(&gz->z, buf, (long)sizeof(buf));
if (!NIL_P(gz->orig_name)) {
zstream_append_buffer2(&gz->z, gz->orig_name);
zstream_append_buffer(&gz->z, (Bytef*)"\0", 1);
}
if (!NIL_P(gz->comment)) {
zstream_append_buffer2(&gz->z, gz->comment);
zstream_append_buffer(&gz->z, (Bytef*)"\0", 1);
}
gz->z.flags |= GZFILE_FLAG_HEADER_FINISHED;
}
static void
gzfile_make_footer(struct gzfile *gz)
{
Bytef buf[8]; /* 8 is the size of gzip footer */
gzfile_set32(gz->crc, buf);
gzfile_set32(gz->z.stream.total_in, &buf[4]);
zstream_append_buffer(&gz->z, buf, (long)sizeof(buf));
gz->z.flags |= GZFILE_FLAG_FOOTER_FINISHED;
}
static void
gzfile_read_header(struct gzfile *gz)
{
const unsigned char *head;
long len;
char flags, *p;
if (!gzfile_read_raw_ensure(gz, 10)) { /* 10 is the size of gzip header */
gzfile_raise(gz, cGzError, "not in gzip format");
}
head = (unsigned char*)RSTRING_PTR(gz->z.input);
if (head[0] != GZ_MAGIC1 || head[1] != GZ_MAGIC2) {
gzfile_raise(gz, cGzError, "not in gzip format");
}
if (head[2] != GZ_METHOD_DEFLATE) {
rb_raise(cGzError, "unsupported compression method %d", head[2]);
}
flags = head[3];
if (flags & GZ_FLAG_MULTIPART) {
rb_raise(cGzError, "multi-part gzip file is not supported");
}
else if (flags & GZ_FLAG_ENCRYPT) {
rb_raise(cGzError, "encrypted gzip file is not supported");
}
else if (flags & GZ_FLAG_UNKNOWN_MASK) {
rb_raise(cGzError, "unknown flags 0x%02x", flags);
}
if (head[8] & GZ_EXTRAFLAG_FAST) {
gz->level = Z_BEST_SPEED;
}
else if (head[8] & GZ_EXTRAFLAG_SLOW) {
gz->level = Z_BEST_COMPRESSION;
}
else {
gz->level = Z_DEFAULT_COMPRESSION;
}
gz->mtime = gzfile_get32(&head[4]);
gz->os_code = head[9];
zstream_discard_input(&gz->z, 10);
if (flags & GZ_FLAG_EXTRA) {
if (!gzfile_read_raw_ensure(gz, 2)) {
rb_raise(cGzError, "unexpected end of file");
}
len = gzfile_get16((Bytef*)RSTRING_PTR(gz->z.input));
if (!gzfile_read_raw_ensure(gz, 2 + len)) {
rb_raise(cGzError, "unexpected end of file");
}
zstream_discard_input(&gz->z, 2 + len);
}
if (flags & GZ_FLAG_ORIG_NAME) {
if (!gzfile_read_raw_ensure(gz, 1)) {
rb_raise(cGzError, "unexpected end of file");
}
p = gzfile_read_raw_until_zero(gz, 0);
len = p - RSTRING_PTR(gz->z.input);
gz->orig_name = rb_str_new(RSTRING_PTR(gz->z.input), len);
OBJ_TAINT(gz->orig_name); /* for safe */
zstream_discard_input(&gz->z, len + 1);
}
if (flags & GZ_FLAG_COMMENT) {
if (!gzfile_read_raw_ensure(gz, 1)) {
rb_raise(cGzError, "unexpected end of file");
}
p = gzfile_read_raw_until_zero(gz, 0);
len = p - RSTRING_PTR(gz->z.input);
gz->comment = rb_str_new(RSTRING_PTR(gz->z.input), len);
OBJ_TAINT(gz->comment); /* for safe */
zstream_discard_input(&gz->z, len + 1);
}
if (gz->z.input != Qnil && RSTRING_LEN(gz->z.input) > 0) {
zstream_run(&gz->z, 0, 0, Z_SYNC_FLUSH);
}
}
static void
gzfile_check_footer(struct gzfile *gz)
{
unsigned long crc, length;
gz->z.flags |= GZFILE_FLAG_FOOTER_FINISHED;
if (!gzfile_read_raw_ensure(gz, 8)) { /* 8 is the size of gzip footer */
gzfile_raise(gz, cNoFooter, "footer is not found");
}
crc = gzfile_get32((Bytef*)RSTRING_PTR(gz->z.input));
length = gzfile_get32((Bytef*)RSTRING_PTR(gz->z.input) + 4);
gz->z.stream.total_in += 8; /* to rewind correctly */
zstream_discard_input(&gz->z, 8);
if (gz->crc != crc) {
rb_raise(cCRCError, "invalid compressed data -- crc error");
}
if ((uint32_t)gz->z.stream.total_out != length) {
rb_raise(cLengthError, "invalid compressed data -- length error");
}
}
static void
gzfile_write(struct gzfile *gz, Bytef *str, long len)
{
if (!(gz->z.flags & GZFILE_FLAG_HEADER_FINISHED)) {
gzfile_make_header(gz);
}
if (len > 0 || (gz->z.flags & GZFILE_FLAG_SYNC)) {
gz->crc = checksum_long(crc32, gz->crc, str, len);
zstream_run(&gz->z, str, len, (gz->z.flags & GZFILE_FLAG_SYNC)
? Z_SYNC_FLUSH : Z_NO_FLUSH);
}
gzfile_write_raw(gz);
}
static long
gzfile_read_more(struct gzfile *gz)
{
VALUE str;
while (!ZSTREAM_IS_FINISHED(&gz->z)) {
str = gzfile_read_raw(gz);
if (NIL_P(str)) {
if (!ZSTREAM_IS_FINISHED(&gz->z)) {
rb_raise(cGzError, "unexpected end of file");
}
break;
}
if (RSTRING_LEN(str) > 0) { /* prevent Z_BUF_ERROR */
zstream_run(&gz->z, (Bytef*)RSTRING_PTR(str), RSTRING_LEN(str),
Z_SYNC_FLUSH);
RB_GC_GUARD(str);
}
if (gz->z.buf_filled > 0) break;
}
return gz->z.buf_filled;
}
static void
gzfile_calc_crc(struct gzfile *gz, VALUE str)
{
if (RSTRING_LEN(str) <= gz->ungetc) {
gz->ungetc -= RSTRING_LEN(str);
}
else {
gz->crc = checksum_long(crc32, gz->crc, (Bytef*)RSTRING_PTR(str) + gz->ungetc,
RSTRING_LEN(str) - gz->ungetc);
gz->ungetc = 0;
}
}
static VALUE
gzfile_newstr(struct gzfile *gz, VALUE str)
{
if (!gz->enc2) {
rb_enc_associate(str, gz->enc);
OBJ_TAINT(str); /* for safe */
return str;
}
if (gz->ec && rb_enc_dummy_p(gz->enc2)) {
str = rb_econv_str_convert(gz->ec, str, ECONV_PARTIAL_INPUT);
rb_enc_associate(str, gz->enc);
OBJ_TAINT(str);
return str;
}
return rb_str_conv_enc_opts(str, gz->enc2, gz->enc,
gz->ecflags, gz->ecopts);
}
static long
gzfile_fill(struct gzfile *gz, long len)
{
if (len < 0)
rb_raise(rb_eArgError, "negative length %ld given", len);
if (len == 0)
return 0;
while (!ZSTREAM_IS_FINISHED(&gz->z) && gz->z.buf_filled < len) {
gzfile_read_more(gz);
}
if (GZFILE_IS_FINISHED(gz)) {
if (!(gz->z.flags & GZFILE_FLAG_FOOTER_FINISHED)) {
gzfile_check_footer(gz);
}
return -1;
}
return len < gz->z.buf_filled ? len : gz->z.buf_filled;
}
static VALUE
gzfile_read(struct gzfile *gz, long len)
{
VALUE dst;
len = gzfile_fill(gz, len);
if (len == 0) return rb_str_new(0, 0);
if (len < 0) return Qnil;
dst = zstream_shift_buffer(&gz->z, len);
if (!NIL_P(dst)) gzfile_calc_crc(gz, dst);
return dst;
}
static VALUE
gzfile_readpartial(struct gzfile *gz, long len, VALUE outbuf)
{
VALUE dst;
if (len < 0)
rb_raise(rb_eArgError, "negative length %ld given", len);
if (!NIL_P(outbuf))
OBJ_TAINT(outbuf);
if (len == 0) {
if (NIL_P(outbuf))
return rb_str_new(0, 0);
else {
rb_str_resize(outbuf, 0);
return outbuf;
}
}
while (!ZSTREAM_IS_FINISHED(&gz->z) && gz->z.buf_filled == 0) {
gzfile_read_more(gz);
}
if (GZFILE_IS_FINISHED(gz)) {
if (!(gz->z.flags & GZFILE_FLAG_FOOTER_FINISHED)) {
gzfile_check_footer(gz);
}
if (!NIL_P(outbuf))
rb_str_resize(outbuf, 0);
rb_raise(rb_eEOFError, "end of file reached");
}
dst = zstream_shift_buffer(&gz->z, len);
gzfile_calc_crc(gz, dst);
if (!NIL_P(outbuf)) {
rb_str_resize(outbuf, RSTRING_LEN(dst));
memcpy(RSTRING_PTR(outbuf), RSTRING_PTR(dst), RSTRING_LEN(dst));
RB_GC_GUARD(dst);
dst = outbuf;
}
OBJ_TAINT(dst); /* for safe */
return dst;
}
static VALUE
gzfile_read_all(struct gzfile *gz)
{
VALUE dst;
while (!ZSTREAM_IS_FINISHED(&gz->z)) {
gzfile_read_more(gz);
}
if (GZFILE_IS_FINISHED(gz)) {
if (!(gz->z.flags & GZFILE_FLAG_FOOTER_FINISHED)) {
gzfile_check_footer(gz);
}
return rb_str_new(0, 0);
}
dst = zstream_detach_buffer(&gz->z);
if (NIL_P(dst)) return dst;
gzfile_calc_crc(gz, dst);
OBJ_TAINT(dst);
return gzfile_newstr(gz, dst);
}
static VALUE
gzfile_getc(struct gzfile *gz)
{
VALUE buf, dst = 0;
int len;
len = rb_enc_mbmaxlen(gz->enc);
while (!ZSTREAM_IS_FINISHED(&gz->z) && gz->z.buf_filled < len) {
gzfile_read_more(gz);
}
if (GZFILE_IS_FINISHED(gz)) {
if (!(gz->z.flags & GZFILE_FLAG_FOOTER_FINISHED)) {
gzfile_check_footer(gz);
}
return Qnil;
}
if (gz->ec && rb_enc_dummy_p(gz->enc2)) {
const unsigned char *ss, *sp, *se;
unsigned char *ds, *dp, *de;
if (!gz->cbuf) {
gz->cbuf = ALLOC_N(char, GZFILE_CBUF_CAPA);
}
ss = sp = (const unsigned char*)RSTRING_PTR(gz->z.buf);
se = sp + gz->z.buf_filled;
ds = dp = (unsigned char *)gz->cbuf;
de = (unsigned char *)ds + GZFILE_CBUF_CAPA;
(void)rb_econv_convert(gz->ec, &sp, se, &dp, de, ECONV_PARTIAL_INPUT|ECONV_AFTER_OUTPUT);
rb_econv_check_error(gz->ec);
dst = zstream_shift_buffer(&gz->z, sp - ss);
gzfile_calc_crc(gz, dst);
dst = rb_str_new(gz->cbuf, dp - ds);
rb_enc_associate(dst, gz->enc);
OBJ_TAINT(dst);
return dst;
}
else {
buf = gz->z.buf;
len = rb_enc_mbclen(RSTRING_PTR(buf), RSTRING_END(buf), gz->enc);
dst = gzfile_read(gz, len);
if (NIL_P(dst)) return dst;
return gzfile_newstr(gz, dst);
}
}
static void
gzfile_ungets(struct gzfile *gz, const Bytef *b, long len)
{
zstream_buffer_ungets(&gz->z, b, len);
gz->ungetc+=len;
}
static void
gzfile_ungetbyte(struct gzfile *gz, int c)
{
zstream_buffer_ungetbyte(&gz->z, c);
gz->ungetc++;
}
static VALUE
gzfile_writer_end_run(VALUE arg)
{
struct gzfile *gz = (struct gzfile *)arg;
if (!(gz->z.flags & GZFILE_FLAG_HEADER_FINISHED)) {
gzfile_make_header(gz);
}
zstream_run(&gz->z, (Bytef*)"", 0, Z_FINISH);
gzfile_make_footer(gz);
gzfile_write_raw(gz);
return Qnil;
}
static void
gzfile_writer_end(struct gzfile *gz)
{
if (ZSTREAM_IS_CLOSING(&gz->z)) return;
gz->z.flags |= ZSTREAM_FLAG_CLOSING;
rb_ensure(gzfile_writer_end_run, (VALUE)gz, zstream_end, (VALUE)&gz->z);
}
static VALUE
gzfile_reader_end_run(VALUE arg)
{
struct gzfile *gz = (struct gzfile *)arg;
if (GZFILE_IS_FINISHED(gz)
&& !(gz->z.flags & GZFILE_FLAG_FOOTER_FINISHED)) {
gzfile_check_footer(gz);
}
return Qnil;
}
static void
gzfile_reader_end(struct gzfile *gz)
{
if (ZSTREAM_IS_CLOSING(&gz->z)) return;
gz->z.flags |= ZSTREAM_FLAG_CLOSING;
rb_ensure(gzfile_reader_end_run, (VALUE)gz, zstream_end, (VALUE)&gz->z);
}
static void
gzfile_reader_rewind(struct gzfile *gz)
{
long n;
n = gz->z.stream.total_in;
if (!NIL_P(gz->z.input)) {
n += RSTRING_LEN(gz->z.input);
}
rb_funcall(gz->io, id_seek, 2, rb_int2inum(-n), INT2FIX(1));
gzfile_reset(gz);
}
static VALUE
gzfile_reader_get_unused(struct gzfile *gz)
{
VALUE str;
if (!ZSTREAM_IS_READY(&gz->z)) return Qnil;
if (!GZFILE_IS_FINISHED(gz)) return Qnil;
if (!(gz->z.flags & GZFILE_FLAG_FOOTER_FINISHED)) {
gzfile_check_footer(gz);
}
if (NIL_P(gz->z.input)) return Qnil;
str = rb_str_resurrect(gz->z.input);
OBJ_TAINT(str); /* for safe */
return str;
}
static struct gzfile *
get_gzfile(VALUE obj)
{
struct gzfile *gz;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
if (!ZSTREAM_IS_READY(&gz->z)) {
rb_raise(cGzError, "closed gzip stream");
}
return gz;
}
/* ------------------------------------------------------------------------- */
/*
* Document-class: Zlib::GzipFile
*
* Zlib::GzipFile is an abstract class for handling a gzip formatted
* compressed file. The operations are defined in the subclasses,
* Zlib::GzipReader for reading, and Zlib::GzipWriter for writing.
*
* GzipReader should be used by associating an IO, or IO-like, object.
*
* == Method Catalogue
*
* - ::wrap
* - ::open (Zlib::GzipReader::open and Zlib::GzipWriter::open)
* - #close
* - #closed?
* - #comment
* - comment= (Zlib::GzipWriter#comment=)
* - #crc
* - eof? (Zlib::GzipReader#eof?)
* - #finish
* - #level
* - lineno (Zlib::GzipReader#lineno)
* - lineno= (Zlib::GzipReader#lineno=)
* - #mtime
* - mtime= (Zlib::GzipWriter#mtime=)
* - #orig_name
* - orig_name (Zlib::GzipWriter#orig_name=)
* - #os_code
* - path (when the underlying IO supports #path)
* - #sync
* - #sync=
* - #to_io
*
* (due to internal structure, documentation may appear under Zlib::GzipReader
* or Zlib::GzipWriter)
*/
typedef struct {
int argc;
VALUE *argv;
VALUE klass;
} new_wrap_arg_t;
static VALUE
new_wrap(VALUE tmp)
{
new_wrap_arg_t *arg = (new_wrap_arg_t *)tmp;
return rb_class_new_instance(arg->argc, arg->argv, arg->klass);
}
static VALUE
gzfile_ensure_close(VALUE obj)
{
struct gzfile *gz;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
if (ZSTREAM_IS_READY(&gz->z)) {
gzfile_close(gz, 1);
}
return Qnil;
}
static VALUE
gzfile_wrap(int argc, VALUE *argv, VALUE klass, int close_io_on_error)
{
VALUE obj;
if (close_io_on_error) {
int state = 0;
new_wrap_arg_t arg;
arg.argc = argc;
arg.argv = argv;
arg.klass = klass;
obj = rb_protect(new_wrap, (VALUE)&arg, &state);
if (state) {
rb_io_close(argv[0]);
rb_jump_tag(state);
}
}
else {
obj = rb_class_new_instance(argc, argv, klass);
}
if (rb_block_given_p()) {
return rb_ensure(rb_yield, obj, gzfile_ensure_close, obj);
}
else {
return obj;
}
}
/*
* Document-method: Zlib::GzipFile.wrap
*
* call-seq:
* Zlib::GzipReader.wrap(io, ...) { |gz| ... }
* Zlib::GzipWriter.wrap(io, ...) { |gz| ... }
*
* Creates a GzipReader or GzipWriter associated with +io+, passing in any
* necessary extra options, and executes the block with the newly created
* object just like File.open.
*
* The GzipFile object will be closed automatically after executing the block.
* If you want to keep the associated IO object open, you may call
* Zlib::GzipFile#finish method in the block.
*/
static VALUE
rb_gzfile_s_wrap(int argc, VALUE *argv, VALUE klass)
{
return gzfile_wrap(argc, argv, klass, 0);
}
/*
* Document-method: Zlib::GzipFile.open
*
* See Zlib::GzipReader#open and Zlib::GzipWriter#open.
*/
static VALUE
gzfile_s_open(int argc, VALUE *argv, VALUE klass, const char *mode)
{
VALUE io, filename;
rb_check_arity(argc, 1, UNLIMITED_ARGUMENTS);
filename = argv[0];
io = rb_file_open_str(filename, mode);
argv[0] = io;
return gzfile_wrap(argc, argv, klass, 1);
}
/*
* Document-method: Zlib::GzipFile#to_io
*
* Same as IO.
*/
static VALUE
rb_gzfile_to_io(VALUE obj)
{
return get_gzfile(obj)->io;
}
/*
* Document-method: Zlib::GzipFile#crc
*
* Returns CRC value of the uncompressed data.
*/
static VALUE
rb_gzfile_crc(VALUE obj)
{
return rb_uint2inum(get_gzfile(obj)->crc);
}
/*
* Document-method: Zlib::GzipFile#mtime
*
* Returns last modification time recorded in the gzip file header.
*/
static VALUE
rb_gzfile_mtime(VALUE obj)
{
return rb_time_new(get_gzfile(obj)->mtime, (time_t)0);
}
/*
* Document-method: Zlib::GzipFile#level
*
* Returns compression level.
*/
static VALUE
rb_gzfile_level(VALUE obj)
{
return INT2FIX(get_gzfile(obj)->level);
}
/*
* Document-method: Zlib::GzipFile#os_code
*
* Returns OS code number recorded in the gzip file header.
*/
static VALUE
rb_gzfile_os_code(VALUE obj)
{
return INT2FIX(get_gzfile(obj)->os_code);
}
/*
* Document-method: Zlib::GzipFile#orig_name
*
* Returns original filename recorded in the gzip file header, or +nil+ if
* original filename is not present.
*/
static VALUE
rb_gzfile_orig_name(VALUE obj)
{
VALUE str = get_gzfile(obj)->orig_name;
if (!NIL_P(str)) {
str = rb_str_dup(str);
}
OBJ_TAINT(str); /* for safe */
return str;
}
/*
* Document-method: Zlib::GzipFile#comment
*
* Returns comments recorded in the gzip file header, or nil if the comments
* is not present.
*/
static VALUE
rb_gzfile_comment(VALUE obj)
{
VALUE str = get_gzfile(obj)->comment;
if (!NIL_P(str)) {
str = rb_str_dup(str);
}
OBJ_TAINT(str); /* for safe */
return str;
}
/*
* Document-method: Zlib::GzipFile#lineno
*
* The line number of the last row read from this file.
*/
static VALUE
rb_gzfile_lineno(VALUE obj)
{
return INT2NUM(get_gzfile(obj)->lineno);
}
/*
* Document-method: Zlib::GzipReader#lineno=
*
* Specify line number of the last row read from this file.
*/
static VALUE
rb_gzfile_set_lineno(VALUE obj, VALUE lineno)
{
struct gzfile *gz = get_gzfile(obj);
gz->lineno = NUM2INT(lineno);
return lineno;
}
/*
* Document-method: Zlib::GzipWriter#mtime=
*
* Specify the modification time (+mtime+) in the gzip header.
* Using a Fixnum or Integer.
*
* Setting the mtime in the gzip header does not effect the
* mtime of the file generated. Different utilities that
* expand the gzipped files may use the mtime
* header. For example the gunzip utility can use the `-N`
* flag which will set the resultant file's mtime to the
* value in the header. By default many tools will set
* the mtime of the expanded file to the mtime of the
* gzipped file, not the mtime in the header.
*
* If you do not set an mtime, the default value will be the time
* when compression started. Setting a value of 0 indicates
* no time stamp is available.
*/
static VALUE
rb_gzfile_set_mtime(VALUE obj, VALUE mtime)
{
struct gzfile *gz = get_gzfile(obj);
VALUE val;
if (gz->z.flags & GZFILE_FLAG_HEADER_FINISHED) {
rb_raise(cGzError, "header is already written");
}
val = rb_Integer(mtime);
gz->mtime = NUM2UINT(val);
return mtime;
}
/*
* Document-method: Zlib::GzipFile#orig_name=
*
* Specify the original name (+str+) in the gzip header.
*/
static VALUE
rb_gzfile_set_orig_name(VALUE obj, VALUE str)
{
struct gzfile *gz = get_gzfile(obj);
VALUE s;
char *p;
if (gz->z.flags & GZFILE_FLAG_HEADER_FINISHED) {
rb_raise(cGzError, "header is already written");
}
s = rb_str_dup(rb_str_to_str(str));
p = memchr(RSTRING_PTR(s), '\0', RSTRING_LEN(s));
if (p) {
rb_str_resize(s, p - RSTRING_PTR(s));
}
gz->orig_name = s;
return str;
}
/*
* Document-method: Zlib::GzipFile#comment=
*
* Specify the comment (+str+) in the gzip header.
*/
static VALUE
rb_gzfile_set_comment(VALUE obj, VALUE str)
{
struct gzfile *gz = get_gzfile(obj);
VALUE s;
char *p;
if (gz->z.flags & GZFILE_FLAG_HEADER_FINISHED) {
rb_raise(cGzError, "header is already written");
}
s = rb_str_dup(rb_str_to_str(str));
p = memchr(RSTRING_PTR(s), '\0', RSTRING_LEN(s));
if (p) {
rb_str_resize(s, p - RSTRING_PTR(s));
}
gz->comment = s;
return str;
}
/*
* Document-method: Zlib::GzipFile#close
*
* Closes the GzipFile object. This method calls close method of the
* associated IO object. Returns the associated IO object.
*/
static VALUE
rb_gzfile_close(VALUE obj)
{
struct gzfile *gz;
VALUE io;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
if (!ZSTREAM_IS_READY(&gz->z)) {
return Qnil;
}
io = gz->io;
gzfile_close(gz, 1);
return io;
}
/*
* Document-method: Zlib::GzipFile#finish
*
* Closes the GzipFile object. Unlike Zlib::GzipFile#close, this method never
* calls the close method of the associated IO object. Returns the associated IO
* object.
*/
static VALUE
rb_gzfile_finish(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE io;
io = gz->io;
gzfile_close(gz, 0);
return io;
}
/*
* Document-method: Zlib::GzipFile#closed?
*
* Same as IO#closed?
*
*/
static VALUE
rb_gzfile_closed_p(VALUE obj)
{
struct gzfile *gz;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
return NIL_P(gz->io) ? Qtrue : Qfalse;
}
/*
* Document-method: Zlib::GzipFile#eof?
*
* Returns +true+ or +false+ whether the stream has reached the end.
*/
static VALUE
rb_gzfile_eof_p(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
return GZFILE_IS_FINISHED(gz) ? Qtrue : Qfalse;
}
/*
* Document-method: Zlib::GzipFile#sync
*
* Same as IO#sync
*
*/
static VALUE
rb_gzfile_sync(VALUE obj)
{
return (get_gzfile(obj)->z.flags & GZFILE_FLAG_SYNC) ? Qtrue : Qfalse;
}
/*
* Document-method: Zlib::GzipFile#sync=
*
* call-seq: sync = flag
*
* Same as IO. If flag is +true+, the associated IO object must respond to the
* +flush+ method. While +sync+ mode is +true+, the compression ratio
* decreases sharply.
*/
static VALUE
rb_gzfile_set_sync(VALUE obj, VALUE mode)
{
struct gzfile *gz = get_gzfile(obj);
if (RTEST(mode)) {
gz->z.flags |= GZFILE_FLAG_SYNC;
}
else {
gz->z.flags &= ~GZFILE_FLAG_SYNC;
}
return mode;
}
/*
* Document-method: Zlib::GzipFile#total_in
*
* Total number of input bytes read so far.
*/
static VALUE
rb_gzfile_total_in(VALUE obj)
{
return rb_uint2inum(get_gzfile(obj)->z.stream.total_in);
}
/*
* Document-method: Zlib::GzipFile#total_out
*
* Total number of output bytes output so far.
*/
static VALUE
rb_gzfile_total_out(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
return rb_uint2inum(gz->z.stream.total_out - gz->z.buf_filled);
}
/*
* Document-method: Zlib::GzipFile#path
*
* call-seq: path
*
* Returns the path string of the associated IO-like object. This
* method is only defined when the IO-like object responds to #path().
*/
static VALUE
rb_gzfile_path(VALUE obj)
{
struct gzfile *gz;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
return gz->path;
}
static void
rb_gzfile_ecopts(struct gzfile *gz, VALUE opts)
{
if (!NIL_P(opts)) {
rb_io_extract_encoding_option(opts, &gz->enc, &gz->enc2, NULL);
}
if (gz->enc2) {
gz->ecflags = rb_econv_prepare_opts(opts, &opts);
gz->ec = rb_econv_open_opts(gz->enc2->name, gz->enc->name,
gz->ecflags, opts);
gz->ecopts = opts;
}
}
/* ------------------------------------------------------------------------- */
/*
* Document-class: Zlib::GzipWriter
*
* Zlib::GzipWriter is a class for writing gzipped files. GzipWriter should
* be used with an instance of IO, or IO-like, object.
*
* Following two example generate the same result.
*
* Zlib::GzipWriter.open('hoge.gz') do |gz|
* gz.write 'jugemu jugemu gokou no surikire...'
* end
*
* File.open('hoge.gz', 'w') do |f|
* gz = Zlib::GzipWriter.new(f)
* gz.write 'jugemu jugemu gokou no surikire...'
* gz.close
* end
*
* To make like gzip(1) does, run following:
*
* orig = 'hoge.txt'
* Zlib::GzipWriter.open('hoge.gz') do |gz|
* gz.mtime = File.mtime(orig)
* gz.orig_name = orig
* gz.write IO.binread(orig)
* end
*
* NOTE: Due to the limitation of Ruby's finalizer, you must explicitly close
* GzipWriter objects by Zlib::GzipWriter#close etc. Otherwise, GzipWriter
* will be not able to write the gzip footer and will generate a broken gzip
* file.
*/
static VALUE
rb_gzwriter_s_allocate(VALUE klass)
{
return gzfile_writer_new(klass);
}
/*
* call-seq: Zlib::GzipWriter.open(filename, level=nil, strategy=nil) { |gz| ... }
*
* Opens a file specified by +filename+ for writing gzip compressed data, and
* returns a GzipWriter object associated with that file. Further details of
* this method are found in Zlib::GzipWriter.new and Zlib::GzipFile.wrap.
*/
static VALUE
rb_gzwriter_s_open(int argc, VALUE *argv, VALUE klass)
{
return gzfile_s_open(argc, argv, klass, "wb");
}
/*
* call-seq:
* Zlib::GzipWriter.new(io, level = nil, strategy = nil, options = {})
*
* Creates a GzipWriter object associated with +io+. +level+ and +strategy+
* should be the same as the arguments of Zlib::Deflate.new. The GzipWriter
* object writes gzipped data to +io+. +io+ must respond to the
* +write+ method that behaves the same as IO#write.
*
* The +options+ hash may be used to set the encoding of the data.
* +:external_encoding+, +:internal_encoding+ and +:encoding+ may be set as in
* IO::new.
*/
static VALUE
rb_gzwriter_initialize(int argc, VALUE *argv, VALUE obj)
{
struct gzfile *gz;
VALUE io, level, strategy, opt = Qnil;
int err;
if (argc > 1) {
opt = rb_check_convert_type(argv[argc-1], T_HASH, "Hash", "to_hash");
if (!NIL_P(opt)) argc--;
}
rb_scan_args(argc, argv, "12", &io, &level, &strategy);
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
/* this is undocumented feature of zlib */
gz->level = ARG_LEVEL(level);
err = deflateInit2(&gz->z.stream, gz->level, Z_DEFLATED,
-MAX_WBITS, DEF_MEM_LEVEL, ARG_STRATEGY(strategy));
if (err != Z_OK) {
raise_zlib_error(err, gz->z.stream.msg);
}
gz->io = io;
ZSTREAM_READY(&gz->z);
rb_gzfile_ecopts(gz, opt);
if (rb_respond_to(io, id_path)) {
gz->path = rb_funcall(gz->io, id_path, 0);
rb_define_singleton_method(obj, "path", rb_gzfile_path, 0);
}
return obj;
}
/*
* call-seq: flush(flush=nil)
*
* Flushes all the internal buffers of the GzipWriter object. The meaning of
* +flush+ is same as in Zlib::Deflate#deflate. <tt>Zlib::SYNC_FLUSH</tt> is used if
* +flush+ is omitted. It is no use giving flush <tt>Zlib::NO_FLUSH</tt>.
*/
static VALUE
rb_gzwriter_flush(int argc, VALUE *argv, VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE v_flush;
int flush;
rb_scan_args(argc, argv, "01", &v_flush);
flush = FIXNUMARG(v_flush, Z_SYNC_FLUSH);
if (flush != Z_NO_FLUSH) { /* prevent Z_BUF_ERROR */
zstream_run(&gz->z, (Bytef*)"", 0, flush);
}
gzfile_write_raw(gz);
if (rb_respond_to(gz->io, id_flush)) {
rb_funcall(gz->io, id_flush, 0);
}
return obj;
}
/*
* Same as IO.
*/
static VALUE
rb_gzwriter_write(VALUE obj, VALUE str)
{
struct gzfile *gz = get_gzfile(obj);
if (!RB_TYPE_P(str, T_STRING))
str = rb_obj_as_string(str);
if (gz->enc2 && gz->enc2 != rb_ascii8bit_encoding()) {
str = rb_str_conv_enc(str, rb_enc_get(str), gz->enc2);
}
gzfile_write(gz, (Bytef*)RSTRING_PTR(str), RSTRING_LEN(str));
RB_GC_GUARD(str);
return INT2FIX(RSTRING_LEN(str));
}
/*
* Same as IO.
*/
static VALUE
rb_gzwriter_putc(VALUE obj, VALUE ch)
{
struct gzfile *gz = get_gzfile(obj);
char c = NUM2CHR(ch);
gzfile_write(gz, (Bytef*)&c, 1);
return ch;
}
/*
* Document-method: <<
* Same as IO.
*/
#define rb_gzwriter_addstr rb_io_addstr
/*
* Document-method: printf
* Same as IO.
*/
#define rb_gzwriter_printf rb_io_printf
/*
* Document-method: print
* Same as IO.
*/
#define rb_gzwriter_print rb_io_print
/*
* Document-method: puts
* Same as IO.
*/
#define rb_gzwriter_puts rb_io_puts
/* ------------------------------------------------------------------------- */
/*
* Document-class: Zlib::GzipReader
*
* Zlib::GzipReader is the class for reading a gzipped file. GzipReader should
* be used as an IO, or -IO-like, object.
*
* Zlib::GzipReader.open('hoge.gz') {|gz|
* print gz.read
* }
*
* File.open('hoge.gz') do |f|
* gz = Zlib::GzipReader.new(f)
* print gz.read
* gz.close
* end
*
* == Method Catalogue
*
* The following methods in Zlib::GzipReader are just like their counterparts
* in IO, but they raise Zlib::Error or Zlib::GzipFile::Error exception if an
* error was found in the gzip file.
* - #each
* - #each_line
* - #each_byte
* - #gets
* - #getc
* - #lineno
* - #lineno=
* - #read
* - #readchar
* - #readline
* - #readlines
* - #ungetc
*
* Be careful of the footer of the gzip file. A gzip file has the checksum of
* pre-compressed data in its footer. GzipReader checks all uncompressed data
* against that checksum at the following cases, and if it fails, raises
* <tt>Zlib::GzipFile::NoFooter</tt>, <tt>Zlib::GzipFile::CRCError</tt>, or
* <tt>Zlib::GzipFile::LengthError</tt> exception.
*
* - When an reading request is received beyond the end of file (the end of
* compressed data). That is, when Zlib::GzipReader#read,
* Zlib::GzipReader#gets, or some other methods for reading returns nil.
* - When Zlib::GzipFile#close method is called after the object reaches the
* end of file.
* - When Zlib::GzipReader#unused method is called after the object reaches
* the end of file.
*
* The rest of the methods are adequately described in their own
* documentation.
*/
static VALUE
rb_gzreader_s_allocate(VALUE klass)
{
return gzfile_reader_new(klass);
}
/*
* Document-method: Zlib::GzipReader.open
*
* call-seq: Zlib::GzipReader.open(filename) {|gz| ... }
*
* Opens a file specified by +filename+ as a gzipped file, and returns a
* GzipReader object associated with that file. Further details of this method
* are in Zlib::GzipReader.new and ZLib::GzipFile.wrap.
*/
static VALUE
rb_gzreader_s_open(int argc, VALUE *argv, VALUE klass)
{
return gzfile_s_open(argc, argv, klass, "rb");
}
/*
* Document-method: Zlib::GzipReader.new
*
* call-seq:
* Zlib::GzipReader.new(io, options = {})
*
* Creates a GzipReader object associated with +io+. The GzipReader object reads
* gzipped data from +io+, and parses/decompresses it. The +io+ must
* have a +read+ method that behaves same as the IO#read.
*
* The +options+ hash may be used to set the encoding of the data.
* +:external_encoding+, +:internal_encoding+ and +:encoding+ may be set as in
* IO::new.
*
* If the gzip file header is incorrect, raises an Zlib::GzipFile::Error
* exception.
*/
static VALUE
rb_gzreader_initialize(int argc, VALUE *argv, VALUE obj)
{
VALUE io, opt = Qnil;
struct gzfile *gz;
int err;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
rb_scan_args(argc, argv, "1:", &io, &opt);
/* this is undocumented feature of zlib */
err = inflateInit2(&gz->z.stream, -MAX_WBITS);
if (err != Z_OK) {
raise_zlib_error(err, gz->z.stream.msg);
}
gz->io = io;
ZSTREAM_READY(&gz->z);
gzfile_read_header(gz);
rb_gzfile_ecopts(gz, opt);
if (rb_respond_to(io, id_path)) {
gz->path = rb_funcall(gz->io, id_path, 0);
rb_define_singleton_method(obj, "path", rb_gzfile_path, 0);
}
return obj;
}
/*
* Document-method: Zlib::GzipReader#rewind
*
* Resets the position of the file pointer to the point created the GzipReader
* object. The associated IO object needs to respond to the +seek+ method.
*/
static VALUE
rb_gzreader_rewind(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
gzfile_reader_rewind(gz);
return INT2FIX(0);
}
/*
* Document-method: Zlib::GzipReader#unused
*
* Returns the rest of the data which had read for parsing gzip format, or
* +nil+ if the whole gzip file is not parsed yet.
*/
static VALUE
rb_gzreader_unused(VALUE obj)
{
struct gzfile *gz;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
return gzfile_reader_get_unused(gz);
}
/*
* Document-method: Zlib::GzipReader#read
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_read(int argc, VALUE *argv, VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE vlen;
long len;
rb_scan_args(argc, argv, "01", &vlen);
if (NIL_P(vlen)) {
return gzfile_read_all(gz);
}
len = NUM2INT(vlen);
if (len < 0) {
rb_raise(rb_eArgError, "negative length %ld given", len);
}
return gzfile_read(gz, len);
}
/*
* Document-method: Zlib::GzipReader#readpartial
*
* call-seq:
* gzipreader.readpartial(maxlen [, outbuf]) => string, outbuf
*
* Reads at most <i>maxlen</i> bytes from the gziped stream but
* it blocks only if <em>gzipreader</em> has no data immediately available.
* If the optional <i>outbuf</i> argument is present,
* it must reference a String, which will receive the data.
* It raises <code>EOFError</code> on end of file.
*/
static VALUE
rb_gzreader_readpartial(int argc, VALUE *argv, VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE vlen, outbuf;
long len;
rb_scan_args(argc, argv, "11", &vlen, &outbuf);
len = NUM2INT(vlen);
if (len < 0) {
rb_raise(rb_eArgError, "negative length %ld given", len);
}
if (!NIL_P(outbuf))
Check_Type(outbuf, T_STRING);
return gzfile_readpartial(gz, len, outbuf);
}
/*
* Document-method: Zlib::GzipReader#getc
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_getc(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
return gzfile_getc(gz);
}
/*
* Document-method: Zlib::GzipReader#readchar
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_readchar(VALUE obj)
{
VALUE dst;
dst = rb_gzreader_getc(obj);
if (NIL_P(dst)) {
rb_raise(rb_eEOFError, "end of file reached");
}
return dst;
}
/*
* Document-method: Zlib::GzipReader#getbyte
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_getbyte(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE dst;
dst = gzfile_read(gz, 1);
if (!NIL_P(dst)) {
dst = INT2FIX((unsigned int)(RSTRING_PTR(dst)[0]) & 0xff);
}
return dst;
}
/*
* Document-method: Zlib::GzipReader#readbyte
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_readbyte(VALUE obj)
{
VALUE dst;
dst = rb_gzreader_getbyte(obj);
if (NIL_P(dst)) {
rb_raise(rb_eEOFError, "end of file reached");
}
return dst;
}
/*
* Document-method: Zlib::GzipReader#each_char
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_each_char(VALUE obj)
{
VALUE c;
RETURN_ENUMERATOR(obj, 0, 0);
while (!NIL_P(c = rb_gzreader_getc(obj))) {
rb_yield(c);
}
return Qnil;
}
/*
* Document-method: Zlib::GzipReader#each_byte
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_each_byte(VALUE obj)
{
VALUE c;
RETURN_ENUMERATOR(obj, 0, 0);
while (!NIL_P(c = rb_gzreader_getbyte(obj))) {
rb_yield(c);
}
return Qnil;
}
/*
* Document-method: Zlib::GzipReader#bytes
*
* This is a deprecated alias for <code>each_byte</code>.
*/
static VALUE
rb_gzreader_bytes(VALUE obj)
{
rb_warn("Zlib::GzipReader#bytes is deprecated; use #each_byte instead");
if (!rb_block_given_p())
return rb_enumeratorize(obj, ID2SYM(rb_intern("each_byte")), 0, 0);
return rb_gzreader_each_byte(obj);
}
/*
* Document-method: Zlib::GzipReader#ungetc
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_ungetc(VALUE obj, VALUE s)
{
struct gzfile *gz;
if (FIXNUM_P(s))
return rb_gzreader_ungetbyte(obj, s);
gz = get_gzfile(obj);
StringValue(s);
if (gz->enc2 && gz->enc2 != rb_ascii8bit_encoding()) {
s = rb_str_conv_enc(s, rb_enc_get(s), gz->enc2);
}
gzfile_ungets(gz, (const Bytef*)RSTRING_PTR(s), RSTRING_LEN(s));
RB_GC_GUARD(s);
return Qnil;
}
/*
* Document-method: Zlib::GzipReader#ungetbyte
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_ungetbyte(VALUE obj, VALUE ch)
{
struct gzfile *gz = get_gzfile(obj);
gzfile_ungetbyte(gz, NUM2CHR(ch));
return Qnil;
}
static void
gzreader_skip_linebreaks(struct gzfile *gz)
{
VALUE str;
char *p;
int n;
while (gz->z.buf_filled == 0) {
if (GZFILE_IS_FINISHED(gz)) return;
gzfile_read_more(gz);
}
n = 0;
p = RSTRING_PTR(gz->z.buf);
while (n++, *(p++) == '\n') {
if (n >= gz->z.buf_filled) {
str = zstream_detach_buffer(&gz->z);
gzfile_calc_crc(gz, str);
while (gz->z.buf_filled == 0) {
if (GZFILE_IS_FINISHED(gz)) return;
gzfile_read_more(gz);
}
n = 0;
p = RSTRING_PTR(gz->z.buf);
}
}
str = zstream_shift_buffer(&gz->z, n - 1);
gzfile_calc_crc(gz, str);
}
static void
rscheck(const char *rsptr, long rslen, VALUE rs)
{
if (RSTRING_PTR(rs) != rsptr && RSTRING_LEN(rs) != rslen)
rb_raise(rb_eRuntimeError, "rs modified");
}
static long
gzreader_charboundary(struct gzfile *gz, long n)
{
char *s = RSTRING_PTR(gz->z.buf);
char *e = s + gz->z.buf_filled;
char *p = rb_enc_left_char_head(s, s + n, e, gz->enc);
long l = p - s;
if (l < n) {
n = rb_enc_precise_mbclen(p, e, gz->enc);
if (MBCLEN_NEEDMORE_P(n)) {
if ((l = gzfile_fill(gz, l + MBCLEN_NEEDMORE_LEN(n))) > 0) {
return l;
}
}
else if (MBCLEN_CHARFOUND_P(n)) {
return l + MBCLEN_CHARFOUND_LEN(n);
}
}
return n;
}
static VALUE
gzreader_gets(int argc, VALUE *argv, VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE rs;
VALUE dst;
const char *rsptr;
char *p, *res;
long rslen, n, limit = -1;
int rspara;
rb_encoding *enc = gz->enc;
int maxlen = rb_enc_mbmaxlen(enc);
if (argc == 0) {
rs = rb_rs;
}
else {
VALUE lim, tmp;
rb_scan_args(argc, argv, "11", &rs, &lim);
if (!NIL_P(lim)) {
if (!NIL_P(rs)) StringValue(rs);
}
else if (!NIL_P(rs)) {
tmp = rb_check_string_type(rs);
if (NIL_P(tmp)) {
lim = rs;
rs = rb_rs;
}
else {
rs = tmp;
}
}
if (!NIL_P(lim)) {
limit = NUM2LONG(lim);
if (limit == 0) return rb_str_new(0,0);
}
}
if (NIL_P(rs)) {
if (limit < 0) {
dst = gzfile_read_all(gz);
if (RSTRING_LEN(dst) == 0) return Qnil;
}
else if ((n = gzfile_fill(gz, limit)) <= 0) {
return Qnil;
}
else {
if (maxlen > 1 && n >= limit && !GZFILE_IS_FINISHED(gz)) {
n = gzreader_charboundary(gz, n);
}
else {
n = limit;
}
dst = zstream_shift_buffer(&gz->z, n);
if (NIL_P(dst)) return dst;
gzfile_calc_crc(gz, dst);
dst = gzfile_newstr(gz, dst);
}
gz->lineno++;
return dst;
}
if (RSTRING_LEN(rs) == 0) {
rsptr = "\n\n";
rslen = 2;
rspara = 1;
}
else {
rsptr = RSTRING_PTR(rs);
rslen = RSTRING_LEN(rs);
rspara = 0;
}
if (rspara) {
gzreader_skip_linebreaks(gz);
}
while (gz->z.buf_filled < rslen) {
if (ZSTREAM_IS_FINISHED(&gz->z)) {
if (gz->z.buf_filled > 0) gz->lineno++;
return gzfile_read(gz, rslen);
}
gzfile_read_more(gz);
}
p = RSTRING_PTR(gz->z.buf);
n = rslen;
for (;;) {
long filled;
if (n > gz->z.buf_filled) {
if (ZSTREAM_IS_FINISHED(&gz->z)) break;
gzfile_read_more(gz);
p = RSTRING_PTR(gz->z.buf) + n - rslen;
}
if (!rspara) rscheck(rsptr, rslen, rs);
filled = gz->z.buf_filled;
if (limit > 0 && filled >= limit) {
filled = limit;
}
res = memchr(p, rsptr[0], (filled - n + 1));
if (!res) {
n = filled;
if (limit > 0 && filled >= limit) break;
n++;
}
else {
n += (long)(res - p);
p = res;
if (rslen == 1 || memcmp(p, rsptr, rslen) == 0) break;
p++, n++;
}
}
if (maxlen > 1 && n == limit && (gz->z.buf_filled > n || !ZSTREAM_IS_FINISHED(&gz->z))) {
n = gzreader_charboundary(gz, n);
}
gz->lineno++;
dst = gzfile_read(gz, n);
if (NIL_P(dst)) return dst;
if (rspara) {
gzreader_skip_linebreaks(gz);
}
RB_GC_GUARD(rs);
return gzfile_newstr(gz, dst);
}
/*
* Document-method: Zlib::GzipReader#gets
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_gets(int argc, VALUE *argv, VALUE obj)
{
VALUE dst;
dst = gzreader_gets(argc, argv, obj);
if (!NIL_P(dst)) {
rb_lastline_set(dst);
}
return dst;
}
/*
* Document-method: Zlib::GzipReader#readline
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_readline(int argc, VALUE *argv, VALUE obj)
{
VALUE dst;
dst = rb_gzreader_gets(argc, argv, obj);
if (NIL_P(dst)) {
rb_raise(rb_eEOFError, "end of file reached");
}
return dst;
}
/*
* Document-method: Zlib::GzipReader#each
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_each(int argc, VALUE *argv, VALUE obj)
{
VALUE str;
RETURN_ENUMERATOR(obj, 0, 0);
while (!NIL_P(str = gzreader_gets(argc, argv, obj))) {
rb_yield(str);
}
return obj;
}
/*
* Document-method: Zlib::GzipReader#lines
*
* This is a deprecated alias for <code>each_line</code>.
*/
static VALUE
rb_gzreader_lines(int argc, VALUE *argv, VALUE obj)
{
rb_warn("Zlib::GzipReader#lines is deprecated; use #each_line instead");
if (!rb_block_given_p())
return rb_enumeratorize(obj, ID2SYM(rb_intern("each_line")), argc, argv);
return rb_gzreader_each(argc, argv, obj);
}
/*
* Document-method: Zlib::GzipReader#readlines
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_readlines(int argc, VALUE *argv, VALUE obj)
{
VALUE str, dst;
dst = rb_ary_new();
while (!NIL_P(str = gzreader_gets(argc, argv, obj))) {
rb_ary_push(dst, str);
}
return dst;
}
/*
* Document-method: Zlib::GzipReader#external_encoding
*
* See Zlib::GzipReader documentation for a description.
*/
static VALUE
rb_gzreader_external_encoding(VALUE self)
{
return rb_enc_from_encoding(get_gzfile(self)->enc);
}
#endif /* GZIP_SUPPORT */
void
Init_zlib(void)
{
VALUE mZlib, cZStream, cDeflate, cInflate;
#if GZIP_SUPPORT
VALUE cGzipFile, cGzipWriter, cGzipReader;
#endif
mZlib = rb_define_module("Zlib");
id_dictionaries = rb_intern("@dictionaries");
cZError = rb_define_class_under(mZlib, "Error", rb_eStandardError);
cStreamEnd = rb_define_class_under(mZlib, "StreamEnd", cZError);
cNeedDict = rb_define_class_under(mZlib, "NeedDict", cZError);
cDataError = rb_define_class_under(mZlib, "DataError", cZError);
cStreamError = rb_define_class_under(mZlib, "StreamError", cZError);
cMemError = rb_define_class_under(mZlib, "MemError", cZError);
cBufError = rb_define_class_under(mZlib, "BufError", cZError);
cVersionError = rb_define_class_under(mZlib, "VersionError", cZError);
rb_define_module_function(mZlib, "zlib_version", rb_zlib_version, 0);
rb_define_module_function(mZlib, "adler32", rb_zlib_adler32, -1);
rb_define_module_function(mZlib, "adler32_combine", rb_zlib_adler32_combine, 3);
rb_define_module_function(mZlib, "crc32", rb_zlib_crc32, -1);
rb_define_module_function(mZlib, "crc32_combine", rb_zlib_crc32_combine, 3);
rb_define_module_function(mZlib, "crc_table", rb_zlib_crc_table, 0);
/* The Ruby/zlib version string. */
rb_define_const(mZlib, "VERSION", rb_str_new2(RUBY_ZLIB_VERSION));
/* The string which represents the version of zlib.h */
rb_define_const(mZlib, "ZLIB_VERSION", rb_str_new2(ZLIB_VERSION));
cZStream = rb_define_class_under(mZlib, "ZStream", rb_cObject);
rb_undef_alloc_func(cZStream);
rb_define_method(cZStream, "avail_out", rb_zstream_avail_out, 0);
rb_define_method(cZStream, "avail_out=", rb_zstream_set_avail_out, 1);
rb_define_method(cZStream, "avail_in", rb_zstream_avail_in, 0);
rb_define_method(cZStream, "total_in", rb_zstream_total_in, 0);
rb_define_method(cZStream, "total_out", rb_zstream_total_out, 0);
rb_define_method(cZStream, "data_type", rb_zstream_data_type, 0);
rb_define_method(cZStream, "adler", rb_zstream_adler, 0);
rb_define_method(cZStream, "finished?", rb_zstream_finished_p, 0);
rb_define_method(cZStream, "stream_end?", rb_zstream_finished_p, 0);
rb_define_method(cZStream, "closed?", rb_zstream_closed_p, 0);
rb_define_method(cZStream, "ended?", rb_zstream_closed_p, 0);
rb_define_method(cZStream, "close", rb_zstream_end, 0);
rb_define_method(cZStream, "end", rb_zstream_end, 0);
rb_define_method(cZStream, "reset", rb_zstream_reset, 0);
rb_define_method(cZStream, "finish", rb_zstream_finish, 0);
rb_define_method(cZStream, "flush_next_in", rb_zstream_flush_next_in, 0);
rb_define_method(cZStream, "flush_next_out", rb_zstream_flush_next_out, 0);
/* Represents binary data as guessed by deflate.
*
* See Zlib::Deflate#data_type. */
rb_define_const(mZlib, "BINARY", INT2FIX(Z_BINARY));
/* Represents text data as guessed by deflate.
*
* NOTE: The underlying constant Z_ASCII was deprecated in favor of Z_TEXT
* in zlib 1.2.2. New applications should not use this constant.
*
* See Zlib::Deflate#data_type. */
rb_define_const(mZlib, "ASCII", INT2FIX(Z_ASCII));
#ifdef Z_TEXT
/* Represents text data as guessed by deflate.
*
* See Zlib::Deflate#data_type. */
rb_define_const(mZlib, "TEXT", INT2FIX(Z_TEXT));
#endif
/* Represents an unknown data type as guessed by deflate.
*
* See Zlib::Deflate#data_type. */
rb_define_const(mZlib, "UNKNOWN", INT2FIX(Z_UNKNOWN));
cDeflate = rb_define_class_under(mZlib, "Deflate", cZStream);
rb_define_singleton_method(cDeflate, "deflate", rb_deflate_s_deflate, -1);
rb_define_singleton_method(mZlib, "deflate", rb_deflate_s_deflate, -1);
rb_define_alloc_func(cDeflate, rb_deflate_s_allocate);
rb_define_method(cDeflate, "initialize", rb_deflate_initialize, -1);
rb_define_method(cDeflate, "initialize_copy", rb_deflate_init_copy, 1);
rb_define_method(cDeflate, "deflate", rb_deflate_deflate, -1);
rb_define_method(cDeflate, "<<", rb_deflate_addstr, 1);
rb_define_method(cDeflate, "flush", rb_deflate_flush, -1);
rb_define_method(cDeflate, "params", rb_deflate_params, 2);
rb_define_method(cDeflate, "set_dictionary", rb_deflate_set_dictionary, 1);
cInflate = rb_define_class_under(mZlib, "Inflate", cZStream);
rb_define_singleton_method(cInflate, "inflate", rb_inflate_s_inflate, 1);
rb_define_singleton_method(mZlib, "inflate", rb_inflate_s_inflate, 1);
rb_define_alloc_func(cInflate, rb_inflate_s_allocate);
rb_define_method(cInflate, "initialize", rb_inflate_initialize, -1);
rb_define_method(cInflate, "add_dictionary", rb_inflate_add_dictionary, 1);
rb_define_method(cInflate, "inflate", rb_inflate_inflate, 1);
rb_define_method(cInflate, "<<", rb_inflate_addstr, 1);
rb_define_method(cInflate, "sync", rb_inflate_sync, 1);
rb_define_method(cInflate, "sync_point?", rb_inflate_sync_point_p, 0);
rb_define_method(cInflate, "set_dictionary", rb_inflate_set_dictionary, 1);
/* No compression, passes through data untouched. Use this for appending
* pre-compressed data to a deflate stream.
*/
rb_define_const(mZlib, "NO_COMPRESSION", INT2FIX(Z_NO_COMPRESSION));
/* Fastest compression level, but with the lowest space savings. */
rb_define_const(mZlib, "BEST_SPEED", INT2FIX(Z_BEST_SPEED));
/* Slowest compression level, but with the best space savings. */
rb_define_const(mZlib, "BEST_COMPRESSION", INT2FIX(Z_BEST_COMPRESSION));
/* Default compression level which is a good trade-off between space and
* time
*/
rb_define_const(mZlib, "DEFAULT_COMPRESSION",
INT2FIX(Z_DEFAULT_COMPRESSION));
/* Deflate strategy for data produced by a filter (or predictor). The
* effect of FILTERED is to force more Huffman codes and less string
* matching; it is somewhat intermediate between DEFAULT_STRATEGY and
* HUFFMAN_ONLY. Filtered data consists mostly of small values with a
* somewhat random distribution.
*/
rb_define_const(mZlib, "FILTERED", INT2FIX(Z_FILTERED));
/* Deflate strategy which uses Huffman codes only (no string matching). */
rb_define_const(mZlib, "HUFFMAN_ONLY", INT2FIX(Z_HUFFMAN_ONLY));
#ifdef Z_RLE
/* Deflate compression strategy designed to be almost as fast as
* HUFFMAN_ONLY, but give better compression for PNG image data.
*/
rb_define_const(mZlib, "RLE", INT2FIX(Z_RLE));
#endif
#ifdef Z_FIXED
/* Deflate strategy which prevents the use of dynamic Huffman codes,
* allowing for a simpler decoder for specialized applications.
*/
rb_define_const(mZlib, "FIXED", INT2FIX(Z_FIXED));
#endif
/* Default deflate strategy which is used for normal data. */
rb_define_const(mZlib, "DEFAULT_STRATEGY", INT2FIX(Z_DEFAULT_STRATEGY));
/* The maximum size of the zlib history buffer. Note that zlib allows
* larger values to enable different inflate modes. See Zlib::Inflate.new
* for details.
*/
rb_define_const(mZlib, "MAX_WBITS", INT2FIX(MAX_WBITS));
/* The default memory level for allocating zlib deflate compression state.
*/
rb_define_const(mZlib, "DEF_MEM_LEVEL", INT2FIX(DEF_MEM_LEVEL));
/* The maximum memory level for allocating zlib deflate compression state.
*/
rb_define_const(mZlib, "MAX_MEM_LEVEL", INT2FIX(MAX_MEM_LEVEL));
/* NO_FLUSH is the default flush method and allows deflate to decide how
* much data to accumulate before producing output in order to maximize
* compression.
*/
rb_define_const(mZlib, "NO_FLUSH", INT2FIX(Z_NO_FLUSH));
/* The SYNC_FLUSH method flushes all pending output to the output buffer
* and the output is aligned on a byte boundary. Flushing may degrade
* compression so it should be used only when necessary, such as at a
* request or response boundary for a network stream.
*/
rb_define_const(mZlib, "SYNC_FLUSH", INT2FIX(Z_SYNC_FLUSH));
/* Flushes all output as with SYNC_FLUSH, and the compression state is
* reset so that decompression can restart from this point if previous
* compressed data has been damaged or if random access is desired. Like
* SYNC_FLUSH, using FULL_FLUSH too often can seriously degrade
* compression.
*/
rb_define_const(mZlib, "FULL_FLUSH", INT2FIX(Z_FULL_FLUSH));
/* Processes all pending input and flushes pending output. */
rb_define_const(mZlib, "FINISH", INT2FIX(Z_FINISH));
#if GZIP_SUPPORT
id_write = rb_intern("write");
id_read = rb_intern("read");
id_readpartial = rb_intern("readpartial");
id_flush = rb_intern("flush");
id_seek = rb_intern("seek");
id_close = rb_intern("close");
id_path = rb_intern("path");
id_input = rb_intern("@input");
cGzipFile = rb_define_class_under(mZlib, "GzipFile", rb_cObject);
cGzError = rb_define_class_under(cGzipFile, "Error", cZError);
/* input gzipped string */
rb_define_attr(cGzError, "input", 1, 0);
rb_define_method(cGzError, "inspect", gzfile_error_inspect, 0);
cNoFooter = rb_define_class_under(cGzipFile, "NoFooter", cGzError);
cCRCError = rb_define_class_under(cGzipFile, "CRCError", cGzError);
cLengthError = rb_define_class_under(cGzipFile,"LengthError",cGzError);
cGzipWriter = rb_define_class_under(mZlib, "GzipWriter", cGzipFile);
cGzipReader = rb_define_class_under(mZlib, "GzipReader", cGzipFile);
rb_include_module(cGzipReader, rb_mEnumerable);
rb_define_singleton_method(cGzipFile, "wrap", rb_gzfile_s_wrap, -1);
rb_undef_alloc_func(cGzipFile);
rb_define_method(cGzipFile, "to_io", rb_gzfile_to_io, 0);
rb_define_method(cGzipFile, "crc", rb_gzfile_crc, 0);
rb_define_method(cGzipFile, "mtime", rb_gzfile_mtime, 0);
rb_define_method(cGzipFile, "level", rb_gzfile_level, 0);
rb_define_method(cGzipFile, "os_code", rb_gzfile_os_code, 0);
rb_define_method(cGzipFile, "orig_name", rb_gzfile_orig_name, 0);
rb_define_method(cGzipFile, "comment", rb_gzfile_comment, 0);
rb_define_method(cGzipReader, "lineno", rb_gzfile_lineno, 0);
rb_define_method(cGzipReader, "lineno=", rb_gzfile_set_lineno, 1);
rb_define_method(cGzipWriter, "mtime=", rb_gzfile_set_mtime, 1);
rb_define_method(cGzipWriter, "orig_name=", rb_gzfile_set_orig_name,1);
rb_define_method(cGzipWriter, "comment=", rb_gzfile_set_comment, 1);
rb_define_method(cGzipFile, "close", rb_gzfile_close, 0);
rb_define_method(cGzipFile, "finish", rb_gzfile_finish, 0);
rb_define_method(cGzipFile, "closed?", rb_gzfile_closed_p, 0);
rb_define_method(cGzipReader, "eof", rb_gzfile_eof_p, 0);
rb_define_method(cGzipReader, "eof?", rb_gzfile_eof_p, 0);
rb_define_method(cGzipFile, "sync", rb_gzfile_sync, 0);
rb_define_method(cGzipFile, "sync=", rb_gzfile_set_sync, 1);
rb_define_method(cGzipReader, "pos", rb_gzfile_total_out, 0);
rb_define_method(cGzipWriter, "pos", rb_gzfile_total_in, 0);
rb_define_method(cGzipReader, "tell", rb_gzfile_total_out, 0);
rb_define_method(cGzipWriter, "tell", rb_gzfile_total_in, 0);
rb_define_singleton_method(cGzipWriter, "open", rb_gzwriter_s_open,-1);
rb_define_alloc_func(cGzipWriter, rb_gzwriter_s_allocate);
rb_define_method(cGzipWriter, "initialize", rb_gzwriter_initialize,-1);
rb_define_method(cGzipWriter, "flush", rb_gzwriter_flush, -1);
rb_define_method(cGzipWriter, "write", rb_gzwriter_write, 1);
rb_define_method(cGzipWriter, "putc", rb_gzwriter_putc, 1);
rb_define_method(cGzipWriter, "<<", rb_gzwriter_addstr, 1);
rb_define_method(cGzipWriter, "printf", rb_gzwriter_printf, -1);
rb_define_method(cGzipWriter, "print", rb_gzwriter_print, -1);
rb_define_method(cGzipWriter, "puts", rb_gzwriter_puts, -1);
rb_define_singleton_method(cGzipReader, "open", rb_gzreader_s_open,-1);
rb_define_alloc_func(cGzipReader, rb_gzreader_s_allocate);
rb_define_method(cGzipReader, "initialize", rb_gzreader_initialize, -1);
rb_define_method(cGzipReader, "rewind", rb_gzreader_rewind, 0);
rb_define_method(cGzipReader, "unused", rb_gzreader_unused, 0);
rb_define_method(cGzipReader, "read", rb_gzreader_read, -1);
rb_define_method(cGzipReader, "readpartial", rb_gzreader_readpartial, -1);
rb_define_method(cGzipReader, "getc", rb_gzreader_getc, 0);
rb_define_method(cGzipReader, "getbyte", rb_gzreader_getbyte, 0);
rb_define_method(cGzipReader, "readchar", rb_gzreader_readchar, 0);
rb_define_method(cGzipReader, "readbyte", rb_gzreader_readbyte, 0);
rb_define_method(cGzipReader, "each_byte", rb_gzreader_each_byte, 0);
rb_define_method(cGzipReader, "each_char", rb_gzreader_each_char, 0);
rb_define_method(cGzipReader, "bytes", rb_gzreader_bytes, 0);
rb_define_method(cGzipReader, "ungetc", rb_gzreader_ungetc, 1);
rb_define_method(cGzipReader, "ungetbyte", rb_gzreader_ungetbyte, 1);
rb_define_method(cGzipReader, "gets", rb_gzreader_gets, -1);
rb_define_method(cGzipReader, "readline", rb_gzreader_readline, -1);
rb_define_method(cGzipReader, "each", rb_gzreader_each, -1);
rb_define_method(cGzipReader, "each_line", rb_gzreader_each, -1);
rb_define_method(cGzipReader, "lines", rb_gzreader_lines, -1);
rb_define_method(cGzipReader, "readlines", rb_gzreader_readlines, -1);
rb_define_method(cGzipReader, "external_encoding", rb_gzreader_external_encoding, 0);
/* The OS code of current host */
rb_define_const(mZlib, "OS_CODE", INT2FIX(OS_CODE));
/* OS code for MSDOS hosts */
rb_define_const(mZlib, "OS_MSDOS", INT2FIX(OS_MSDOS));
/* OS code for Amiga hosts */
rb_define_const(mZlib, "OS_AMIGA", INT2FIX(OS_AMIGA));
/* OS code for VMS hosts */
rb_define_const(mZlib, "OS_VMS", INT2FIX(OS_VMS));
/* OS code for UNIX hosts */
rb_define_const(mZlib, "OS_UNIX", INT2FIX(OS_UNIX));
/* OS code for Atari hosts */
rb_define_const(mZlib, "OS_ATARI", INT2FIX(OS_ATARI));
/* OS code for OS2 hosts */
rb_define_const(mZlib, "OS_OS2", INT2FIX(OS_OS2));
/* OS code for Mac OS hosts */
rb_define_const(mZlib, "OS_MACOS", INT2FIX(OS_MACOS));
/* OS code for TOPS-20 hosts */
rb_define_const(mZlib, "OS_TOPS20", INT2FIX(OS_TOPS20));
/* OS code for Win32 hosts */
rb_define_const(mZlib, "OS_WIN32", INT2FIX(OS_WIN32));
/* OS code for VM OS hosts */
rb_define_const(mZlib, "OS_VMCMS", INT2FIX(OS_VMCMS));
/* OS code for Z-System hosts */
rb_define_const(mZlib, "OS_ZSYSTEM", INT2FIX(OS_ZSYSTEM));
/* OS code for CP/M hosts */
rb_define_const(mZlib, "OS_CPM", INT2FIX(OS_CPM));
/* OS code for QDOS hosts */
rb_define_const(mZlib, "OS_QDOS", INT2FIX(OS_QDOS));
/* OS code for RISC OS hosts */
rb_define_const(mZlib, "OS_RISCOS", INT2FIX(OS_RISCOS));
/* OS code for unknown hosts */
rb_define_const(mZlib, "OS_UNKNOWN", INT2FIX(OS_UNKNOWN));
#endif /* GZIP_SUPPORT */
}
/* Document error classes. */
/*
* Document-class: Zlib::Error
*
* The superclass for all exceptions raised by Ruby/zlib.
*
* The following exceptions are defined as subclasses of Zlib::Error. These
* exceptions are raised when zlib library functions return with an error
* status.
*
* - Zlib::StreamEnd
* - Zlib::NeedDict
* - Zlib::DataError
* - Zlib::StreamError
* - Zlib::MemError
* - Zlib::BufError
* - Zlib::VersionError
*
*/
/*
* Document-class: Zlib::StreamEnd
*
* Subclass of Zlib::Error
*
* When zlib returns a Z_STREAM_END
* is return if the end of the compressed data has been reached
* and all uncompressed out put has been produced.
*
*/
/*
* Document-class: Zlib::NeedDict
*
* Subclass of Zlib::Error
*
* When zlib returns a Z_NEED_DICT
* if a preset dictionary is needed at this point.
*
* Used by Zlib::Inflate.inflate and <tt>Zlib.inflate</tt>
*/
/*
* Document-class: Zlib::VersionError
*
* Subclass of Zlib::Error
*
* When zlib returns a Z_VERSION_ERROR,
* usually if the zlib library version is incompatible with the
* version assumed by the caller.
*
*/
/*
* Document-class: Zlib::MemError
*
* Subclass of Zlib::Error
*
* When zlib returns a Z_MEM_ERROR,
* usually if there was not enough memory.
*
*/
/*
* Document-class: Zlib::StreamError
*
* Subclass of Zlib::Error
*
* When zlib returns a Z_STREAM_ERROR,
* usually if the stream state was inconsistent.
*
*/
/*
* Document-class: Zlib::BufError
*
* Subclass of Zlib::Error when zlib returns a Z_BUF_ERROR.
*
* Usually if no progress is possible.
*
*/
/*
* Document-class: Zlib::DataError
*
* Subclass of Zlib::Error when zlib returns a Z_DATA_ERROR.
*
* Usually if a stream was prematurely freed.
*
*/
/*
* Document-class: Zlib::GzipFile::Error
*
* Base class of errors that occur when processing GZIP files.
*/
/*
* Document-class: Zlib::GzipFile::NoFooter
*
* Raised when gzip file footer is not found.
*/
/*
* Document-class: Zlib::GzipFile::CRCError
*
* Raised when the CRC checksum recorded in gzip file footer is not equivalent
* to the CRC checksum of the actual uncompressed data.
*/
/*
* Document-class: Zlib::GzipFile::LengthError
*
* Raised when the data length recorded in the gzip file footer is not equivalent
* to the length of the actual uncompressed data.
*/
![[top]](../icons/top.png){kind=icon}
![[bottom]](../icons/n_bottom.png){kind=icon}